SDS Table of Contents

4/17/2018 Grainger SDS Lookup

http://complyplus.grainger.com/grainger/msds.asp?sheetid=4136844 1/12

Common Name: FLAP DISC, ABRASIVE CLOTH ROLL, FIBER DISC, PSA SANDING DISC, ALUMINUM OXIDE SAN

Manufacturer: GRAINGER GLOBAL SOURCING

SDS Revision Date: 12/2/2014

SDS Format: GHS-US

Item Number(s): 10Z935, 10Z936, 10Z937, 10Z938, 10Z939, 10Z940, 10Z941, 10Z942, 10Z943, 10Z944, 10Z945,

10Z946, 10Z947, 10Z948, 10Z949, 10Z950, 10Z951, 10Z952, 10Z953, 10Z954, 10Z955, 10Z956,

10Z957, 10Z958, 10Z959, 10Z960, 10Z961, 10Z962, 10Z963, 10Z964, 10Z965, 10Z966, 10Z967,

10Z968, 10Z969, 11L250, 11L251, 11L252, 11L253, 11L254, 11L255, 11L256, 11L257, 11L258,

11L259, 11L260, 11L261, 11L262, 11L263, 11L264, 11L265, 11L266, 11L267, 11L268, 11L269,

11L270, 11L271, 11L272, 11L273, 11L274, 11L275, 11L276, 11L277, 11L278, 11L279, 11L280,

11L281, 11L282, 11L283, 11L284, 11L285, 11L286, 11L287, 11L288, 11L289, 11L290, 11L291,

11L292, 11L293, 11L294, 11L295, 11L296, 11L297, 11L298, 11L299, 11L301, 11L302, 11L303,

11L304, 11L305, 11L306, 11L307, 11L308, 11L309, 11L310, 11L311, 11L312, 11L313, 11L314,

11L315, 11L316, 11L317, 11L318, 11L319, 11L320, 11L321, 11L322, 11L323, 11L324, 11L325,

11L326, 11L327, 11L328, 11L329, 11L330, 11L331, 11L377, 11L378, 11L379, 11L380, 11L381,

11L382, 11L383, 11L384, 11L385, 11L386, 11L387, 11L388, 11L389, 11L390, 11L391, 11L392,

11L393, 11L394, 11L395, 11L396, 11L397, 11L398, 11L399, 11L401, 11L402, 11L403, 11L404,

11N245, 11N246, 11N247, 11N248, 11N249, 11N250, 11N251, 11N252, 11N253, 11N254, 11N255,

11N256, 11N257, 11N258, 11N259, 11N260, 11N261, 11N262, 11N263, 11N264, 11N265, 11N266,

11N267, 11N281, 11N282, 11N283, 11N284, 11N285, 11N286, 11N287, 11N288, 11N289, 11N290,

11N291, 11N333, 11N334, 11N335, 11N336, 11N337, 11N338, 11N339, 11N340, 11N341, 11N342,

11N343, 11N344, 11N345, 11N346, 11N347, 11N348, 11N349, 11N350, 11N351, 11N352, 11N353,

11N354, 11N355, 11N356, 11N357, 11N358, 23XN54, 23XN55, 23XN56, 23XN57, 23XN58, 23XN59,

23XN60, 23XN61, 23XN62, 23XN63, 23XN64, 23XN65, 23XN66, 23XN67, 23XN68, 23XN69, 23XN70,

23XN71, 23XN72, 23XN73, 23XN74, 23XN75, 23XN76, 23XN77, 23XN78, 23XN79, 23XN80, 23XN81,

23XN82, 23XN83, 23XN84, 23XN85, 23XN86, 23XN87, 23XN88, 23XN89, 23XN90, 23XN91, 23XN92,

23XN93, 23XN94, 23XN95, 23XN96, 23XN97, 23XN98, 23XN99, 23XP01, 23XP02, 23XP03, 23XP04,

23XP05, 23XP06, 23XP07, 23XP08, 23XP09, 23XP10, 23XP11, 23XP12, 23XP13, 23XP14, 23XP15,

23XP16, 23XP17, 23XP18, 23XP19, 23XP20, 23XP21, 23XP22, 23XP23, 23XP24, 23XP25, 23XP26,

23XP27, 23XP28, 23XP29, 23XP30, 23XP31, 23XP32, 23XP33, 23XP34, 23XP35, 23XP36, 23XP37,

23XP38, 23XP39, 23XP40, 23XP41, 23XP42, 23XP43, 23XP44, 23XP45, 23XP46, 23XP47, 23XP48,

23XP49, 23XP50, 23XP51, 23XP52, 23XP53, 23XP54, 23XP55, 23XP56, 23XP57, 23XP58, 23XP59,

23XP60, 23XP61, 23XP62, 23XP63, 23XP64, 23XP65, 23XP66, 23XP67, 23XP68, 23XP69, 23XP70,

23XP71, 23XP72, 23XP73, 23XP74, 23XP75, 23XP76, 23XP77, 23XP78, 23XP79, 23XP80, 23XP81,

23XP82, 23XP83, 23XP84, 23XP85, 31EM71, 31EM72, 31EM73, 31EM74, 31EM75, 31EM76, 31EM77,

31EM78, 31EM79, 31EM80, 31EM81, 31EM82, 31EM83, 31EM84, 31EM85, 31EM86, 31EM87, 31EM88,

31EM89, 31EM90, 31EM91, 31EM92, 31EM93, 6NW94, 6NW95, 6NW96, 6NW97, 6NW98, 6NW99,

6NX01, 6NX02, 6NX03, 6NX04, 6NX05, 6NX06, 6NX07, 6NX08, 6NX09, 6NX10, 6NX11, 6NX12, 6NX13,

6NX14, 6NX15, 6NX16, 6NX17, 6NX18, 6NX19, 6NX20, 6NX21, 6NX22, 6NX23, 6NX24, 6NX25, 6NX26,

6NX27, 6NX28, 6NX29, 6NX30, 6NX31, 6NX32, 6NX33, 6NX34, 6NX35, 6NX36, 6NX37, 6NX38, 6NX39,

6NX40, 6NX41, 6NX42, 6NX43, 6NX44, 6NX45, 6NX46, 6NX47, 6NX48, 6NX49, 6NX50, 6NX51, 6NX52,

6NX53, 6NX54, 6NX55, 6NX56, 6NX57, 6NX58, 6NX59, 6NX60, 6NX61, 6NX62, 6NX63, 6NX64, 6NX65,

6NX66, 6NX67, 6NX68, 6NX69, 6NX70, 6NX71, 6NX72, 6NX73, 6NX74, 6NX75, 6NX76, 6NX77, 6NX78,

6NX79, 6NX80, 6NX81, 6NX82, 6NX83, 6NX84, 6NX85, 6NX86, 6NX87, 6NX88, 6NX89, 6NX90, 6NX91,

6NX92, 6NX93, 6NX94, 6NX95, 6NX96, 6NX97, 6NX98, 6NX99, 6NZ01, 6NZ02, 6NZ03, 6NZ04, 6NZ05,

6NZ06, 6NZ07, 6NZ08

Manufacturer Model Number(s):

SDS Table of Contents

Click the desired link below to jump directly to that section in the SDS.

SECTION 1: IDENTIFICATION

SECTION 2: HAZARD IDENTIFICATION

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS

SECTION 4: FIRST AID MEASURES

SECTION 5: FIRE-FIGHTING MEASURES

SECTION 6: ACCIDENTAL RELEASE MEASURES

SECTION 7: HANDLING AND STORAGE

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

SECTION 10: STABILITY AND REACTIVITY

SECTION 11: TOXICOLOGICAL INFORMATION

SECTION 12: ECOLOGICAL INFORMATION

4/17/2018 Grainger SDS Lookup

http://complyplus.grainger.com/grainger/msds.asp?sheetid=4136844 2/12

SECTION 13: DISPOSAL CONSIDERATIONS

SECTION 14: TRANSPORT INFORMATION

SECTION 15: REGULATORY INFORMATION

SECTION 16: OTHER INFORMATION

FLAP DISC

COATED ABRASIVE

SECTION 1: IDENTIFICATION

1.1. PRODUCT IDENTIFIER:

PRODUCT NAME:

FLAP DISC

ABRASIVE CLOTH ROLL

FIBER DISC

PSA SANDING DISC

ALUMINUM OXIDE SANDER BELT

FLAP WHEEL

1.2. OTHER IDENTIFICATION:

GGS SKU NO.:

6NX58 TO 6NX99

6NZ01 TO 6NZ08

31EM71 TO 31EM93

11L377 TO 11L404

10Z935 TO 10Z969

23XP01 TO 23XP85

23XN54 TO 23XN99

11N333 TO 11N358

11L250 TO 11L331

11N245 TO 11N267

11N281 TO 11N291

1.3. RECOMMENDED USE AND RESTRICTIONS ON USE:

FOR GRINDING AND FINISHING OPERATIONS

1.4. SUPPLIER'S DETAILS:

GRAINGER GLOBAL SOURCING

100 GRAINGER PARKWAY

LAKE FOREST, IL 60045

USA

TEL: 847-535-1000

1.5. EMERGENCY TELEPHONE NUMBER:

EMERGENCY PHONE NUMBER:

GRAINGER TECHNICAL SUPPORT AT: 1-800-356-2501

IN THE CASE OF POISONING, CONTACT CHEMTREC:

1-800-424-9300 (TOLL-FREE); 00 OR +1-703-527-3887 (NON-US)

SECTION 2: HAZARD IDENTIFICATION

2.1. HAZARD CLASSIFICATION:

NOT CLASSIFIED AS HAZARDOUS ACCORDING TO OSHA HAZARD COMMUNICATION

STANDARD, 29 CFR 1910.1200.

4/17/2018 Grainger SDS Lookup

http://complyplus.grainger.com/grainger/msds.asp?sheetid=4136844 3/12

2.2. LABEL ELEMENTS:

SIGNAL WORD: NOT APPLICABLE.

SYMBOLS: NOT APPLICABLE.

PICTOGRAMS: NOT APPLICABLE.

2.3. HAZARDS NOT OTHERWISE CLASSIFIED: NONE.

35% OF THE MIXTURE CONSISTS OF INGREDIENTS OF UNKNOWN ACUTE ORAL TOXICITY.

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS

3.1 FLAP DISC:

HAZARDOUS COMPONENT CAS #

ALUMINUM OXIDE 1344-28-1

AND/OR ZIRCONIUM OXIDE 1314-23-4

CURED PHENOLIC FORMALDEHYDE RESIN 68585-23-9

AND/OR CALCIUM CARBONATE 1317-65-3

AND/OR CRYOLITE (AS FLUORIDES) 15096-52-3

'AND/OR POTASSIUM FLUOROBORATE (AS FLUORIDES) 14075-53-7

AND/OR IRON OXIDE 1309-37-1

AND/OR SORBITAN MONO LAURATE 1338-39-2

AND/OR RUTILE WHITE PIGMENT 13463-67-7

CLOTH (COTTON/POLYCOTTON/POLYESTER) N/A

GLASS FABRIC 7631-86-9

3.2 ABRASIVE CLOTH ROLL:

HAZARDOUS COMPONENT CAS #

ALUMINUM OXIDE 1344-28-1

CURED PHENOLIC FORMALDEHYDE RESIN 68585-23-9

GLUE 9000-70-8

AND/OR CALCIUM CARBONATE 1317-65-3

AND/OR IRON OXIDE 1309-37-1

AND/OR SORBITAN MONO LAURATE 1338-39-2

AND/OR RUTILE WHITE PIGMENT 13463-67-7

CLOTH (COTTON/POLYCOTTON/POLYESTER) N/A

3.3 FIBER DISC:

INGREDIENTS CAS #

ALUMINUM OXIDE 1344-28-1

4/17/2018 Grainger SDS Lookup

http://complyplus.grainger.com/grainger/msds.asp?sheetid=4136844 4/12

SILICON CARBIDE 409-21-2

AND/OR ZIRCONIUM OXIDE 1314-23-4

CURED PHENOLIC FORMALDEHYDE RESIN 68585-23-9

AND/OR CALCIUM CARBONATE 1317-65-3

AND/OR CRYOLITE (AS FLUORIDES) 15096-52-3

'AND/OR POTASSIUM FLUOROBORATE (AS FLUORIDES) 14075-53-7

AND/OR IRON OXIDE 1309-37-1

AND/OR SORBITAN MONO LAURATE 1338-39-2

AND/OR RUTILE WHITE PIGMENT 13463-67-7

'AND/OR BLUE PIGMENT N/A

VULCANIZED FIBER N/A

3.4 PSA DISC:

INGREDIENTS CAS #

ALUMINUM OXIDE 1344-28-1

SILICON CARBIDE 409-21-2

AND/OR ZIRCONIUM OXIDE 1314-23-4

CURED PHENOLIC FORMALDEHYDE RESIN 68585-23-9

AND/OR CALCIUM CARBONATE 1317-65-3

AND/OR CRYOLITE (AS FLUORIDES) 15096-52-3

'AND/OR POTASSIUM FLUOROBORATE (AS FLUORIDES) 14075-53-7

AND/OR IRON OXIDE 1309-37-1

AND/OR SORBITAN MONO LAURATE 1338-39-2

AND/OR RUTILE WHITE PIGMENT 13463-67-7

CLOTH (COTTON/POLYCOTTON/POLYESTER) N/A

'AND/OR PAPER BACKING N/A

STICKY PAPER N/A

3.5 ALUMINUM OXIDE SANDER BELT:

INGREDIENTS CAS #

ALUMINUM OXIDE 1344-28-1

CURED PHENOLIC FORMALDEHYDE RESIN 68585-23-9

AND/OR CALCIUM CARBONATE 1317-65-3

AND/OR CRYOLITE (AS FLUORIDES) 15096-52-3

'AND/OR POTASSIUM FLUOROBORATE (AS FLUORIDES) 14075-53-7

AND/OR IRON OXIDE 1309-37-1

4/17/2018 Grainger SDS Lookup

http://complyplus.grainger.com/grainger/msds.asp?sheetid=4136844 5/12

AND/OR SORBITAN MONO LAURATE 1338-39-2

AND/OR RUTILE WHITE PIGMENT 13463-67-7

CLOTH (COTTON/POLYCOTTON/POLYESTER) N/A

KEVLAR TAPE (POLYAMIDE) 9080-59-5

POLYURETHANE 53504-41-9

3.6 FLAP WHEELS:

INGREDIENTS CAS #

ALUMINUM OXIDE 1344-28-1

CURED PHENOLIC FORMALDEHYDE RESIN 68585-23-9

AND/OR CALCIUM CARBONATE 1317-65-3

AND/OR IRON OXIDE 1309-37-1

AND/OR SORBITAN MONO LAURATE 1338-39-2

CLOTH (COTTON/POLYCOTTON/POLYESTER) N/A

CURED EPOXY BOND 90598-46-2

FLANGE (STEEL) 12597-69-2

SECTION 4: FIRST AID MEASURES

4.1. DESCRIPTION OF FIRST AID MEASURES:

INHALATION:

REMOVE PERSON TO FRESH AIR. IF YOU FEEL UNWELL, GET MEDICAL ATTENTION.

SKIN CONTACT:

WASH WITH SOAP AND WATER. IF SIGNS/SYMPTOMS DEVELOP, GET MEDICAL ATTENTION.

EYE CONTACT:

FLUSH WITH LARGE AMOUNTS OF WATER. REMOVE CONTACT LENSES IF EASY TO DO.

CONTINUE RINSING. IF SIGNS/SYMPTOMS PERSIST, GET MEDICAL ATTENTION.

IF SWALLOWED: NO NEED FOR FIRST AID IS ANTICIPATED.

4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:

SEE SECTION 11.1. INFORMATION ON TOXICOLOGICAL EFFECTS.

4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT

REQUIRED: NOT APPLICABLE

SECTION 5: FIRE-FIGHTING MEASURES

5.1. SUITABLE EXTINGUISHING MEDIA:

IN CASE OF FIRE:

USE A FIRE FIGHTING AGENT SUITABLE FOR ORDINARY COMBUSTIBLE MATERIAL SUCH

AS WATER OR FOAM TO EXTINGUISH.

5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:

NONE INHERENT IN THIS PRODUCT.

4/17/2018 Grainger SDS Lookup

http://complyplus.grainger.com/grainger/msds.asp?sheetid=4136844 6/12

HAZARDOUS DECOMPOSITION OR BY-PRODUCTS:

SUBSTANCE CONDITION

CARBON MONOXIDE DURING COMBUSTION

CARBON DIOXIDE DURING COMBUSTION

5.3. SPECIAL PROTECTIVE ACTIONS FOR FIRE-FIGHTERS:

NO UNUSUAL FIRE OR EXPLOSION HAZARDS ARE ANTICIPATED.

SECTION 6: ACCIDENTAL RELEASE MEASURES

6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:

OBSERVE PRECAUTIONS FROM OTHER SECTIONS.

6.2. ENVIRONMENTAL PRECAUTIONS: AVOID RELEASE TO THE ENVIRONMENT.

6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP: NOT APPLICABLE.

SECTION 7: HANDLING AND STORAGE

7.1. PRECAUTIONS FOR SAFE HANDLING:

FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. AVOID BREATHING OF DUST CREATED BY

SANDING, GRINDING OR MACHINING. AVOID RELEASE TO THE ENVIRONMENT.

COMBUSTIBLE DUST MAY FORM BY ACTION OF THIS PRODUCT ON ANOTHER MATERIAL

(SUBSTRATE). DUST GENERATED FROM THE SUBSTRATE DURING USE OF THIS PRODUCT

MAY BE EXPLOSIVE IF IN SUFFICIENT CONCENTRATION WITH AN IGNITION SOURCE.

DUST DEPOSITS SHOULD NOT BE ALLOWED TO ACCUMULATE ON SURFACES BECAUSE OF

THE POTENTIAL FOR SECONDARY EXPLOSIONS.

7.2. CONDITIONS FOR SAFE STORAGE INCLUDING ANY INCOMPATIBILITIES:

NO SPECIAL STORAGE REQUIREMENTS.

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1. CONTROL PARAMETERS:

OCCUPATIONAL EXPOSURE LIMITS:

8.1.1 FLAP DISC:

HAZARDOUS COMPONENT OSHA PEL ACGIH TLV

ALUMINUM OXIDE 15 MG/M3 (TOTAL DUST) 10 MG/M3

AND/OR ZIRCONIUM OXIDE 5 MG/M3 5 MG/M3

CURED PHENOLIC FORMALDEHYDE RESIN NONE ESTABLISHED NONE ESTABLISHED

AND/OR CALCIUM CARBONATE 15 MG/M3 (TOTAL DUST) 10 MG/M3

AND/OR CRYOLITE (AS FLUORIDES) 2.5 MG/M3 2.5 MG/M3

AND/OR POTASSIUM FLUOROBORATE 2.5 MG/M3 2.5 MG/M3

(AS FLUORIDES)

AND/OR IRON OXIDE 5 MG/M3 10 MG/M3

AND/OR SORBITAN MONO LAURATE NONE ESTABLISHED NONE ESTABLISHED

4/17/2018 Grainger SDS Lookup

http://complyplus.grainger.com/grainger/msds.asp?sheetid=4136844 7/12

AND/OR RUTILE WHITE PIGMENT 10 MG/M3 10 MG/M3

CLOTH (COTTON/POLYCOTTON/ NONE ESTABLISHED NONE ESTABLISHED

POLYESTER)

GLASS FABRIC 10 MG/M3 0.1 MG/M3

8.1.2 ABRASIVE CLOTH ROLL:

HAZARDOUS COMPONENT OSHA PEL ACGIH TLV

ALUMINUM OXIDE 15 MG/M3 (TOTAL DUST) 10 MG/M3

CURED PHENOLIC FORMALDEHYDE RESIN NONE ESTABLISHED NONE ESTABLISHED

GLUE NONE ESTABLISHED NONE ESTABLISHED

AND/OR CALCIUM CARBONATE 15 MG/M3 (TOTAL DUST) 10 MG/M3

AND/OR IRON OXIDE 5 MG/M3 10 MG/M3

AND/OR SORBITAN MONO LAURATE NONE ESTABLISHED NONE ESTABLISHED

AND/OR RUTILE WHITE PIGMENT 10 MG/M3 10 MG/M3

CLOTH (COTTON/POLYCOTTON/ NONE ESTABLISHED NONE ESTABLISHED

POLYESTER)

8.1.3 FIBER DISC:

HAZARDOUS COMPONENT OSHA PEL ACGIH TLV

ALUMINUM OXIDE 15 MG/M3 (TOTAL DUST) 10 MG/M3

SILICON CARBIDE 15 MG/M3 (TOTAL DUST) 10 MG/M3

AND/OR ZIRCONIUM OXIDE 5 MG/M3 5 MG/M3

CURED PHENOLIC FORMALDEHYDE RESIN NONE ESTABLISHED NONE ESTABLISHED

AND/OR CALCIUM CARBONATE 15 MG/M3 (TOTAL DUST) 10 MG/M3

AND/OR CRYOLITE (AS FLUORIDES) 2.5 MG/M3 2.5 MG/M3

AND/OR POTASSIUM FLUOROBORATE 2.5 MG/M3 2.5 MG/M3

(AS FLUORIDES)

AND/OR IRON OXIDE 5 MG/M3 10 MG/M3

AND/OR SORBITAN MONO LAURATE NONE ESTABLISHED NONE ESTABLISHED

AND/OR RUTILE WHITE PIGMENT 10 MG/M3 10 MG/M3

'AND/OR BLUE PIGMENT 5 MG/M3 10 MG/M3

VULCANIZED FIBER NONE ESTABLISHED NON ESTABLISHED

8.1.4 PSA DISC:

HAZARDOUS COMPONENT OSHA PEL ACGIH TLV

ALUMINUM OXIDE 15 MG/M3 (TOTAL DUST) 10 MG/M3

SILICON CARBIDE 15 MG/M3 (TOTAL DUST) 10 MG/M3

AND/OR ZIRCONIUM OXIDE 5 MG/M3 5 MG/M3

CURED PHENOLIC FORMALDEHYDE RESIN NONE ESTABLISHED NONE ESTABLISHED

4/17/2018 Grainger SDS Lookup

http://complyplus.grainger.com/grainger/msds.asp?sheetid=4136844 8/12

AND/OR CALCIUM CARBONATE 15 MG/M3 (TOTAL DUST) 10 MG/M3

AND/OR CRYOLITE (AS FLUORIDES) 2.5 MG/M3 2.5 MG/M3

AND/OR POTASSIUM FLUOROBORATE 2.5 MG/M3 2.5 MG/M3

(AS FLUORIDES)

AND/OR IRON OXIDE 5 MG/M3 10 MG/M3

AND/OR SORBITAN MONO LAURATE NONE ESTABLISHED NONE ESTABLISHED

AND/OR RUTILE WHITE PIGMENT 10 MG/M3 10 MG/M3

CLOTH (COTTON/POLYCOTTON/ NONE ESTABLISHED NONE ESTABLISHED

POLYESTER)

'AND/OR PAPER BACKING 15 MG/M3 10 MG/M3

STICKY PAPER NONE ESTABLISHED NONE ESTABLISHED

8.1.5 ALUMINUM OXIDE SANDER BELT:

HAZARDOUS COMPONENT OSHA PEL ACGIH TLV

ALUMINUM OXIDE 15 MG/M3 (TOTAL DUST) 10 MG/M3

CURED PHENOLIC FORMALDEHYDE RESIN NONE ESTABLISHED NONE ESTABLISHED

AND/OR CALCIUM CARBONATE 15 MG/M3 (TOTAL DUST) 10 MG/M3

AND/OR CRYOLITE (AS FLUORIDES) 2.5 MG/M3 2.5 MG/M3

AND/OR POTASSIUM FLUOROBORATE 2.5 MG/M3 2.5 MG/M3

(AS FLUORIDES)

AND/OR IRON OXIDE 5 MG/M3 10 MG/M3

AND/OR SORBITAN MONO LAURATE NONE ESTABLISHED NONE ESTABLISHED

CLOTH (COTTON/POLYCOTTON/ NONE ESTABLISHED NONE ESTABLISHED

POLYESTER)

POLYAMIDE NONE ESTABLISHED NONE ESTABLISHED

POLYURETHANE NONE ESTABLISHED NONE ESTABLISHED

8.1.6 FLAP WHEELS:

HAZARDOUS COMPONENT OSHA PEL ACGIH TLV

ALUMINIUM OXIDE 15 MG/M3 (TOTAL DUST) 5 MG/M3

CLOTH BACKING NONE ESTABLISHED NONE ESTABLISHED

CURED PHENOLIC FORMALDEHYDE RESIN NONE ESTABLISHED NONE ESTABLISHED

CURED EPOXY RESIN NONE ESTABLISHED NONE ESTABLISHED

CALCIUM CARBONATE 15 MG/M3 (TOTAL DUST) 10 MG/M3

FLINT 1 MG/M3 1 MG/M3

MILD STEEL/ SS /NON FERROUS NONE ESTABLISHED NONE ESTABLISHED

METALS

8.2. EXPOSURE CONTROLS:

4/17/2018 Grainger SDS Lookup

http://complyplus.grainger.com/grainger/msds.asp?sheetid=4136844 9/12

8.2.1. ENGINEERING CONTROLS:

PROVIDE APPROPRIATE LOCAL EXHAUST VENTILATION FOR SANDING, GRINDING OR

MACHINING. USE GENERAL DILUTION VENTILATION AND/OR LOCAL EXHAUST

VENTILATION TO CONTROL AIRBORNE EXPOSURES TO BELOW RELEVANT EXPOSURE LIMITS

AND/OR CONTROL DUST/FUME/GAS/MIST/VAPORS/SPRAY. IF VENTILATION IS NOT

ADEQUATE, USE RESPIRATORY PROTECTION EQUIPMENT. PROVIDE LOCAL EXHAUST AT

PROCESS EMISSION SOURCES TO CONTROL EXPOSURE NEAR THE SOURCE AND TO PREVENT

THE ESCAPE OF DUST INTO THE WORK AREA. ENSURE THAT DUST-HANDLING SYSTEMS

(SUCH AS EXHAUST DUCTS, DUST COLLECTORS, VESSELS, AND PROCESSING EQUIPMENT)

ARE DESIGNED IN A MANNER TO PREVENT THE ESCAPE OF DUST INTO THE WORK AREA

(I.E., THERE IS NO LEAKAGE FROM THE EQUIPMENT).

8.2.2. PERSONAL PROTECTIVE EQUIPMENT (PPE):

EYE/FACE PROTECTION:

TO MINIMIZE THE RISK OF INJURY TO FACE AND EYES, ALWAYS WEAR EYE AND FACE

PROTECTION WHEN WORKING AT SANDING OR GRINDING OPERATIONS OR WHEN NEAR SUCH

OPERATIONS. SELECT AND USE EYE/FACE PROTECTION TO PREVENT CONTACT BASED ON

THE RESULTS OF AN EXPOSURE ASSESSMENT. THE FOLLOWING EYE/FACE PROTECTION(S)

ARE RECOMMENDED: SAFETY GLASSES WITH SIDE SHIELDS

SKIN/HAND PROTECTION:

WEAR APPROPRIATE GLOVES TO MINIMIZE RISK OF INJURY TO SKIN FROM CONTACT

WITH DUST OR PHYSICAL ABRASION FROM GRINDING OR SANDING.

RESPIRATORY PROTECTION:

ASSESS EXPOSURE CONCENTRATIONS OF ALL MATERIALS INVOLVED IN THE WORK

PROCESS. CONSIDER MATERIAL BEING ABRADED WHEN DETERMINING THE APPROPRIATE

RESPIRATORY PROTECTION. SELECT AND USE APPROPRIATE RESPIRATORS TO PREVENT

INHALATION OVEREXPOSURE.

AN EXPOSURE ASSESSMENT MAY BE NEEDED TO DECIDE IF A RESPIRATOR IS REQUIRED.

IF A RESPIRATOR IS NEEDED, USE RESPIRATORS AS PART OF A FULL RESPIRATORY

PROTECTION PROGRAM. BASED ON THE RESULTS OF THE EXPOSURE ASSESSMENT, SELECT

FROM THE FOLLOWING RESPIRATOR TYPE(S) TO REDUCE INHALATION EXPOSURE:

HALF FACE PIECE OR FULL FACE PIECE AIR-PURIFYING RESPIRATOR SUITABLE FOR

PARTICULATES

FOR QUESTIONS ABOUT SUITABILITY FOR A SPECIFIC APPLICATION, CONSULT WITH

YOUR RESPIRATOR MANUFACTURER.

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

GENERAL PHYSICAL FORM: SOLID

ODOR: NOT APPLICABLE

ODOR THRESHOLD: NOT APPLICABLE

PH: NOT APPLICABLE

MELTING POINT: NOT APPLICABLE

BOILING POINT: NOT APPLICABLE

FLASH POINT: NON-COMBUSTIBLE

EVAPORATION RATE: NOT APPLICABLE

FLAMMABILITY (SOLID, GAS): NOT APPLICABLE

FLAMMABLE LIMITS (LEL/UEL): NOT APPLICABLE

4/17/2018 Grainger SDS Lookup

http://complyplus.grainger.com/grainger/msds.asp?sheetid=4136844 10/12

VAPOR PRESSURE: NOT APPLICABLE

VAPOR DENSITY: NOT APPLICABLE

DENSITY: NOT APPLICABLE

SPECIFIC GRAVITY: NOT APPLICABLE

SOLUBILITY: NOT APPLICABLE

PARTITION COEFFICIENT (N-OCTANOL/ WATER): NOT APPLICABLE

AUTOIGNITION TEMPERATURE: NOT APPLICABLE

DECOMPOSITION TEMPERATURE: NOT APPLICABLE

VISCOSITY: NOT APPLICABLE

SECTION 10: STABILITY AND REACTIVITY

10.1. REACTIVITY:

THIS MATERIAL IS CONSIDERED TO BE NONREACTIVE UNDER NORMAL USE CONDITIONS.

10.2. CHEMICAL STABILITY: STABLE.

10.3. POSSIBILITY OF HAZARDOUS REACTIONS:

HAZARDOUS POLYMERIZATION WILL NOT OCCUR.

10.4. CONDITIONS TO AVOID: NONE KNOWN.

10.5. INCOMPATIBLE MATERIALS: NONE KNOWN.

10.6. HAZARDOUS DECOMPOSITION PRODUCTS:

SUBSTANCE CONDITION: NONE KNOWN.

REFER TO SECTION 5.2 FOR HAZARDOUS DECOMPOSITION PRODUCTS DURING

COMBUSTION.

SECTION 11: TOXICOLOGICAL INFORMATION

THE INFORMATION BELOW MAY NOT BE CONSISTENT WITH THE MATERIAL

CLASSIFICATION IN SECTION 2 IF SPECIFIC INGREDIENT CLASSIFICATIONS ARE

MANDATED BY A COMPETENT AUTHORITY. IN ADDITION, TOXICOLOGICAL DATA ON

INGREDIENTS MAY NOT BE REFLECTED IN THE MATERIAL CLASSIFICATION AND/OR THE

SIGNS AND SYMPTOMS OF EXPOSURE, BECAUSE AN INGREDIENT MAY BE PRESENT BELOW

THE THRESHOLD FOR LABELING, AN INGREDIENT MAY NOT BE AVAILABLE FOR

EXPOSURE, OR THE DATA MAY NOT BE RELEVANT TO THE MATERIAL AS A WHOLE.

11.1. INFORMATION ON TOXICOLOGICAL EFFECTS:

INGESTION:

NONE EXPECTED UNDER NORMAL USE CONDITIONS. SWALLOWING LARGE PIECES MAY

CAUSE OBSTRUCTION OF THE GASTROINTESTINAL TRACT.

INHALATION: DUST MAY CAUSE RESPIRATORY IRRITATION.

EYE:

DUST MAY CAUSE EYE IRRITATION. DUST PARTICLES MAY CAUSE ABRASIVE INJURY TO

THE EYES.

SKIN:

NONE EXPECTED UNDER NORMAL USE CONDITIONS. RUBBING PRODUCT ACROSS THE SKIN

MAY CAUSE MECHANICAL IRRITATION OR ABRASIONS.

4/17/2018 Grainger SDS Lookup

http://complyplus.grainger.com/grainger/msds.asp?sheetid=4136844 11/12

SENSITIZATION: THIS MATERIAL IS NOT KNOWN TO CAUSE SENSITIZATION.

CHRONIC:

LONG-TERM OVEREXPOSURE TO RESPIRABLE DUST MAY CAUSE LUNG DAMAGE (FIBROSIS)

WITH SYMPTOMS OF COUGHING, SHORTNESS OF BREATH AND DIMINISHED BREATHING

CAPACITY. CHRONIC EFFECTS MAY BE AGGRAVATED BY SMOKING. PROLONGED

OVEREXPOSURE TO FLUORIDES MAY CAUSE A BONE CONDITION, FLUOROSIS. PROLONGED

EXPOSURE TO ELEVATED NOISE LEVELS DURING OPERATIONS MAY AFFECT HEARING. A

GREATER HAZARD, IN MOST CASES, IS THE EXPOSURE TO THE DUST/FUMES FROM THE

MATERIAL OR PAINT/COATINGS BEING SANDED. MOST OF THE DUST GENERATED DURING

SANDING IS FROM THE BASE MATERIAL BEING SANDED AND THE POTENTIAL HAZARD

FROM THIS EXPOSURE MUST BE EVALUATED.

CARCINOGENICITY:

TITANIUM DIOXIDE IS LISTED BY IARC AS A GROUP 2B CARCINOGEN (SUSPECTED

HUMAN CARCINOGEN). NONE OF THE OTHER COMPONENTS ARE LISTED AS A CARCINOGEN

OR POTENTIAL CARCINOGEN BY OSHA, NTP OR IARC.

MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE:

EMPLOYEES WITH PRE-EXISTING RESPIRATORY DISEASE MAY BE AT RISK FROM

EXPOSURE.

SECTION 12: ECOLOGICAL INFORMATION

NO ECOLOGICAL DATA IS AVAILABLE FOR THIS PRODUCT. NO HAZARDS TO THE

ENVIRONMENT ARE EXPECTED FROM THIS PRODUCT. HOWEVER, CONSIDERATION

MUST BE GIVEN TO POTENTIAL ENVIRONMENT EFFECTS OF THE BASE MATERIAL

BEING PROCESSED.

SECTION 13: DISPOSAL CONSIDERATIONS

13.1. DISPOSAL METHODS:

DISPOSE IN ACCORDANCE WITH ALL APPLICABLE LOCAL / REGIONAL / NATIONAL

REGULATIONS. LOCAL REGULATIONS MAY BE MORE STRINGENT THAN REGIONAL AND

NATIONAL REQUIREMENTS. IT IS THE RESPONSIBILITY OF THE WASTE GENERATOR TO

DETERMINE THE TOXICITY AND PHYSICAL CHARACTERISTICS OF THE MATERIAL TO

DETERMINE THE PROPER WASTE IDENTIFICATION AND DISPOSAL IN COMPLIANCE WITH

APPLICABLE REGULATIONS.

SECTION 14: TRANSPORT INFORMATION

DOT HAZARDOUS MATERIALS DESCRIPTION:

PROPER SHIPPING NAME: NOT REGULATED

HAZARD CLASS/PACKING GROUP: NONE

LABELS REQUIRED: NONE

SECTION 15: REGULATORY INFORMATION

SARA SECTION 311/312 HAZARD CATEGORIES: NOT APPLICABLE

SECTION 16: OTHER INFORMATION

4/17/2018 Grainger SDS Lookup

http://complyplus.grainger.com/grainger/msds.asp?sheetid=4136844 12/12

NFPA HAZARD RATING:

HEALTH 1

FIRE 0

REACTIVITY 0

LEAST - 0

SLIGHT - 1

MODERATE - 2

HIGH - 3

EXTREME - 4

NA = NOT APPLICABLE

NE = NOT ESTABLISHED

SDS ISSUE DATE: 12/02/2014