User Manual –LS01 Laser 152.738UK
16
15. Disposal :
Please disposal of the unserviceable device according to the current
statutory requirements.
16. Specification :
Voltage : 100/240Vac, 50/60Hz DMX Channels : 11
Fuse : 2A Slow blow Dimensions : 250 x 175 x 110mm
Laser Class : 3B
Power Consumption : 25W
Laser Power : 40mW Green, 80mW Red Weight : 2.6kg
Note: Conforms to Laser and LED Safety standard BSEN60825-1 2007
incorporating corrigendum 2008
Manual copyright protected by QTX Light
LS-01 Laser
User manual
152.564UK
Version 2.0
User Manual –LS01 Laser 152.738UK
2
CAUTION
• Please read this manual fully before installing or
operating this product as it contains important
safety information relating to its installation and
operation.
• This Class 3B laser product emits hazardous
levels of optical radiation and will cause injury to
the eyes if viewed directly.
• This product is not suitable for projection directly at
audiences or other personnel.
• This product must not be used for any form of
audience scanning application and is for
professional use only.
User Manual –LS01 Laser 152.738UK
15
6 (Rotation Speed)
000-255 Rotating Speed (Slow to Fast)
000-075 Clockwise Rotation
076-150 Stop
7 (Rotation
Direction)
151-255 Anti-clockwise Rotation
8 (Liberating Range)
000-255 Librating Range
000-056 LIBRATING Mode 1
057-112 LIBRATING Mode 2
113-168 LIBRATING Mode 3
9 (Liberating Mode)
169-255 LIBRATING Mode 4
000-028 Red & Green (NOTE: No function in Ch 11)
029-056 Green (NOTE: No function in Ch 11)
057-084 Red (NOTE: No function in Ch 11)
085-112 Red Off, Strobe Green
113-140 Green Off, Strobe Red
141-168 Red On, Strobe Green
169-197 Green On, Strobe Red
198-224 Both Red and Green Strobe
10 (COLOUR)
225-255 Alternately Strobe Red & Green
11 (Strobe)
000-255 Slow to Fast
User Manual –LS01 Laser 152.738UK
14
14. DMX controlling :
DMX CHANNEL
DMX
VALUE
DESCRIPTION
000-019 Laser Block Out
020-039 ARA, Auto Running Random Effect
040-059 SRA, Sound Activated Random Effect
060-079 SLP, Slow Moving Patterns Effect
080-099 FAP, Fast Moving Patterns Effect
100-119 SOP, Sound Activated Moving Patterns Effect
120-139 SLL, Slow Moving Lines Effect
140-159 FAL, Fast Moving Lines Effect
160-179 SOL, Sound Activated Moving Lines Effect
080-199 SLD, Slow Moving Dots Effect
200-219 FAD, Fast Moving Dots Effect
220-239 SOD, Sound Activated Moving Dots Effect
1 (Mode)
251-255 DMX MODE (Other channels active)
2 (Rotation Speed)
000-255 Rotating Speed (Slow to Fast)
000-075 Clockwise Rotation
076-150 Stop 3 (Rotation Speed)
151-255 Anti-clockwise Rotation
4 (Liberating Range)
000-255 Librating Range Low to high
000-056 LIBRATING Mode 1
057-112 LIBRATING Mode 2
113-168 LIBRATING Mode 3
5 (Liberating Mode)
169-255 LIBRATING Mode 4
User Manual –LS01 Laser 152.738UK
3
1. Introduction:
This Class 3B
laser product should only be installed and used by
personal who are trained in the management of laser radiation and are able to
operate in accordance within the guidance given by the Health and Safety
Executive (HSE) in HS(G)95: “The Radiation Safety of Lasers used for Display
purposes”.
Copies of this guide can be downloaded from the HSE website below:
www.hse.gov.uk/pubns/priced/hsg95.pdf
This product contains no user-serviceable parts. Under no circumstances
should any attempt be made by the user to dismantle or modify it in any way.
2. Installation and mounting instructions:
This product must be securely mounted so that its emission is always directed
away from people and objects that are able to reflect the emission towards
people. In this regard the separation distances of 3 metres vertically and 2.5
metres horizontally, cited in HS(G)95 and shown overleaf must be observed.
User Manual –LS01 Laser 152.738UK
4
User Manual –LS01 Laser 152.738UK
13
13. DMX-512 connection :
The fixture is equipped with 3-pin XLR connectors for DMX input and output.
The SE connectors are wired in parallel. Only use a shielded twisted-pair cable
designed for 3-pin XLR-plugs and connectors in order to connect the
controller with the fixture or one fixture with another.
Building a serial DMX-chain:
Caution: At the last fixture, the DMX-cable has to end with a terminator.
Solder a 120 Ohm resistor between PIN 2 (-) and PIN 3 (+) into a 3-pin
XLR-plug and plug it in the DMX-output of the last fixture.
User Manual –LS01 Laser 152.738UK
12
12. Functions guide:
FUNC: Select Function
UP: Scroll up
DOWN: Scroll down
ENTER: Confirm selection
DISPLAY STAND ALONE MODE PREPROGRAM EFFECT
ARA Auto Running Random Effect
SRS Sound Activated Random Effect
SLP
Slow Moving Patterns Effect
FAP
Fast Moving Patterns Effect
SOP
Sound Activated Moving Patterns Effect
SLL
Slow Moving Lines Effect
FAL
Fast Moving Lines Effect
SOL
Sound Activated Moving Lines Effect
SLD
Slow Moving Dots Effect
FAD
Fast Moving Dots Effect
SOD
Sound Activated Moving Dots Effect
DMX DMX Address
User Manual –LS01 Laser 152.738UK
5
Always allow enough room for adequate ventilation. It is important never to
obstruct the fan or air-vents
The product must be fixed to suitable rigging using an appropriate clamp and
the fixing screws tightened to prevent the fixture from moving. A suitable
safety cable should also be used.
When selecting the installation location, take into account the need for routine
maintenance and also make sure that there is no possibility of any
unauthorized persons interfering with the installation. Never install in
locations where the product could be exposed to rain, high humidity, extreme
temperatures, or restricted ventilation. Also ensure that the laser is located a
minimum of 0.5metres from any potentially flammable materials
User Manual –LS01 Laser 152.738UK
6
LS01 LASER: For indoor use only
3. General introduction:
This high quality unit with red and green lasers gives an effect similar to one
when a light is shone on a mirror ball generating thousands of laser points. It
can creates light wall, light tunnel and cloud sea effects when used with a
fogger/smoke machine. Its 11 DMX channels and sound activation make this
unit ideal for disco, bars and night clubs.
Features :
11 DMX channels program/sound, rotation speed, rotation
direction, image size, effect speed, colour, strobe
Can be operated by a universal DMX controller (such as 154.059 -
not supplied)
11 stand alone modes of operation
Key control for laser emission with added security of remote
switching facility
Sound activated with sensitivity control
Fan cooled
2 motors for multiple effects
Master/slave mode
User Manual –LS01 Laser 152.738UK
11
11. Layout:
12. Power on indicator
13. Warning label
14. Music detector
15. Laser output point (Lens)
User Manual –LS01 Laser 152.738UK
10
10. Rear display:
1. IEC Power input
2. Safety Key
3. Microphone
4. DMX Input
5. DMX Output
6. Digital control display
7. Function buttons (see section X)
8. Safety Hook
9. Sound sensitivity control
10. Cooling Fan
11. Interlock input (For emergency stop button)
User Manual –LS01 Laser 152.738UK
7
4. Packaging contents:
Please check the contents to ensure that the product has been received in
good condition.
Laser x 1unit User’s Guide x 1pc
IEC Power Lead x 1pc Interlock Connector x 1pcs
Safety Keys x 2pcs
If you find any accessory is missing or the lighting has arrived with any
problems, please contact your local dealer at once. This product contains no
user-serviceable parts so make no attempt to try to fix or modify this item
yourself as this will invalidate the warranty. We recommend you keep the
original package and proof of purchase for any possible replacement or
returned demand.
5. Connect with power supply:
Use the plug to connect to the main power supply as following.
Line Connection International signal
Brown Live L
Blue Neutral N
Yellow /Green Earth E
6. Replacing fuse :
Disconnect from the main power supply first, then remove the fuse from the
IEC Socket or fuse holder . Replace with a fuse of the correct rating as stated
on product label or user guide.
User Manual –LS01 Laser 152.738UK
8
7. Caution:
For your safety, please kindly pay attention to all of the warnings below:
Always plug in the power plug last and disconnect from the mains when
the device is not in use or before cleaning.
Do not install and operate the device in rain or extreme heat, moisture
or dusty environments.
This device is for indoor use only and in a dry environment.
Do not switch on immediately. Wait until the unit reaches room
temperature.
Do not shake the device and avoid brute force when installing or
operating
Do not use the device during thunderstorms and please disconnect the
power.
Do not use solvents or aggressive detergent to clean the device. Use a
soft and clean cloth.
Do not modify the device or the connected power cord without
authorization.
Do not stare into the aperture. This product emits hazardous levels of
optical radiation and will cause serious injury to the eyes if viewed at
close range.
This product should be securely mounted so that its output emission is
always directed away from people and at objects that are able to reflect
emission towards people. In this regard, the separation distances cited
in HS(G)95 should be observed.
The symbol
determines the minimum distance from lighted
objects. The minimum distance between light-output and the
illuminated surface must be more than 0.5m.
User Manual –LS01 Laser 152.738UK
9
8. General maintenance:
Be sure to power off the fixture before conducting maintenance.
To maintain optimum performance and minimize wear, fixtures should be
cleaned frequently. Usage and environment are contributing factors in
determining frequency. As a general rule, fixtures should be cleaned at least
twice a month. Dust build-up reduces can reduce light output & performance
as well as overheating. This can lead to reduced life and increased mechanical
wear.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush
to remove dust collected on external vents and internal components. Clean all
glass when fixture is cold with a mild solution to the cloth or tissue, and drag
dirt and grime to the outside of the lens. Gently polish optical surfaces until
they are free of haze and lint.
The cleaning of internal and external optical lenses and/or mirrors must be
carried out periodically to optimize light output. Cleaning frequently depends
on the environment in which the fixture operates: damp, smoky or
particularly dirty surroundings can require cleaning fluid. Always dry the parts
carefully. Clean the external optics at least every 20 days.
9. Quick trouble shooting :
7.1 If the unit does not function – Check that the main power is on and the
fuse is intact.
7.2 If the unit is not reacting to music – check the unit is in “sound to light”
mode and that the sensitivity control is fully clockwise.
7.3 If the product is not reacting to DMX signals, check the cables and
connections
