LG UltraGear 24GL600F Owner's Manual (English)

* LG LED Monitor applies LCD screen with LED

backlights.

Please read this manual carefully before operating

your set and retain it for future reference.

24GL600F

www.lg.com

OWNER’S MANUAL

(LED Monitor*)

ENGLISH

TABLE OF CONTENTS

LICENSE .......................................3

OPEN SOURCE SOFTWARE

NOTICE INFORMATION ..............4

ASSEMBLING AND PREPARING 4

- Supported Drivers and Software .........................5

- Product and Button Description...........................5

How to Use the Joystick Button

- Moving and Lifting the Monitor............................6

Installing on a Table

Adjusting the Angle

Using the Kensington Lock

Installing the Wall Mount Plate

Installing on the Wall

USING THE MONITOR .............. 12

- Connecting to a PC...................................................13

HDMI Connection

DisplayPort Connection

- Connecting AV Devices ...........................................14

HDMI Connection

Connecting Headphones

USER SETTINGS ....................... 15

- Activating the Main Menu ....................................15

Main Menu Features

- User Settings ...............................................................17

Menu Settings

TROUBLESHOOTING ................ 27

PRODUCT SPECIFICATION ...... 30

- Factory Support Mode............................................32

- HDMI Timing (Video) ................................................33

- Power LED ..................................................................... 33

ENGLISH

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing Administrator, Inc. in the United States and other countries.

ENGLISH

OPEN SOURCE SOFTWARE

NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses,

that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and

LG Electronics will also provide open source code to you on CD-ROM for a charge

covering the cost of performing such distribution (such as the cost of media,

shipping, and handling) upon email request to opensour[email protected]om.

This offer is valid for a period of three years after our last shipment of this product.

This offer is valid to anyone in receipt of this information.

ASSEMBLING AND PREPARING

CAUTION

• Always use genuine LG components to ensure safety and product performance.

• The product warranty will not cover damage or injury caused by the use of

unauthorized components.

• It is recommended that use the supplied components.

• If you use generic cables not certified by LG, the screen may not display or there

may be image noises.

• Illustrations in this document represent typical procedures, so they may look

different from the actual product.

• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when

assembling the product. (Doing so may damage the product.)

• Applying excessive force when tightening screws may cause damage to the

monitor. Damage caused in this way will not be covered by the product warranty.

• Do not carry the monitor upside down by just holding the base. This may cause the

monitor to fall off the stand and could result in personal injury.

• When lifting or moving the monitor, do not touch the monitor screen. The force

applied to the monitor screen may cause damage to it.

• For wave pattern on appearance, unlike the general method of coating, it’s applied

to added glittering material in raw material.With no peeled-off appearance, it has

good durability. Please use it with conﬁdence because there is no problem in using

the product at all.

NOTE

• The components may look different from those illustrated here.

• Without prior notice, all product information and specifications contained in this

manual are subject to change to improve the performance of the product.

• To purchase optional accessories, visit an electronics store or an online shopping

site, or contact the retailer from which you purchased the product.

• The power cord provided may differ depending upon the region.

ENGLISH

Supported Drivers and Software

You can download and install the latest version from the LGE website (www.lg.com).

Drivers and Software Installation Priority

Monitor Driver Recommended

OnScreen Control Recommended

Product and Button Description

Joystick Button

ENGLISH

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or

moving it left/right with your finger.

Basic Functions

Power on

Press the joystick button once with

your finger to turn on the monitor.

Power off

Press and hold the joystick button

once with your finger to turn off the

monitor.

Volume

control

You can control the volume by moving

the joystick button left/right.

Controls

screen

brightness

You can control the screen’s brightness

by moving the joystick button up/down.

NOTE

• The joystick button is located at the bottom of the monitor.

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor

from being scratched or damaged and to ensure safe transportation, regardless of

its shape or size.

• Place the monitor in the original box or packing material before attempting to

move it.

• Before moving or lifting the monitor, disconnect the power cord and all other

cables.

• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.

ENGLISH

• If you use the monitor panel without the stand base, its joystick button may cause

the monitor to become unstable and fall, resulting in damage to the monitor or

human injury. In addition, this may cause the joystick button to malfunction.

• When holding the monitor, the screen should face away from you to prevent it

from being scratched.

• When transporting the monitor, do not expose the monitor to shock or excessive

vibration.

• When moving the monitor, keep it upright and never turn the monitor on its side or

tilt it sideways.

CAUTION

• Avoid touching the monitor screen as much as possible.

- This may result in damage to the screen or some of the pixels used to create

images.

ENGLISH

Installing on a Table

• Lift the monitor and place it on the table in an upright position. Place the monitor

at least 100mm (3.94 inches) away from the wall to ensure sufficient ventilation.

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

CAUTION

• Unplug the power cord before moving or installing the monitor. There is risk of

electric shock.

• Make sure to use the power cord that is provided in the product package and

connect it to a grounded power outlet.

• If you need another power cord, please contact your local dealer or the nearest

retail store.

ENGLISH

Adjusting the Angle

1 Place the monitor mounted on the stand base in an upright position.

2 Adjust the angle of the screen.

The angle of the screen can be adjusted forward or backward from -2° to 15° for a

comfortable viewing experience.

WARNING

• To avoid injury to the fingers when adjusting the screen, do not hold the lower part

of the monitor’s frame as illustrated below.

• Be careful not to touch or press the screen area when adjusting the angle of the

monitor.

Using the Kensington Lock

The connector for the Kensington security system is located at the bottom of the

monitor.

For more information on installation and usage, refer to the Kensington lock owner’s

manual or visit the website at http://www.kensington.com.

Connect the monitor to a table using the Kensington security system cable.

NOTE

• The Kensington security system is optional. You can obtain optional accessories

from most electronics stores.

ENGLISH

Installing the Wall Mount Plate

This monitor meets the specifications for the wall mount plate or other compatible

devices.

1 Place the screen face down. To protect the monitor panel (screen), cover the

surface with a soft cloth or the monitor protection pad included in the product

package.

2 Remove the four screws tightened on the back of the monitor.

3 Place the wall mount plate onto the monitor and align it with the screw holes.

4 Tighten the four screws using a screwdriver to fix the plate to the monitor.

NOTE

• The wall mount plate is sold separately.

• For more information on installation, refer to the wall mount plate’s installation

guide.

• Be careful not to apply too much force while mounting the wall mount plate as it

may cause damage to the screen.

Installing on the Wall

Install the monitor at least 100mm (3.94 inches) away from the wall and leave

about 100mm (3.94 inches) of space at each side of the monitor to ensure

sufficient ventilation. Detailed installation instructions can be obtained from your

local retail store. Alternatively, please refer to the manual for how to install and set

up a tilting wall mounting bracket.

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

ENGLISH

To install the monitor to a wall, attach a wall mounting bracket (optional) to the back

of the monitor.

Make sure that the wall mounting bracket is securely fixed to the monitor and to the

wall.

1 If you use screws longer than the standard length, it may damage the inside of

the product.

2 A non-VESA standard screw may damage the product and cause the monitor

to fall. LG Electronics is not liable for any accidents relating to the use of non-

standard screws.

Wall Mount (mm) 100 x 100

Standard screw M4 x L10

Number of screws 4

Wall Mount Plate (Optional) RW120

NOTE

• Use the screws specified by VESA standards.

• The wall mount kit includes the installation guide and all necessary parts.

• The wall mounting bracket is optional. You can obtain optional accessories from

your local dealer.

• The length of the screw may differ for each wall mounting bracket. Be sure to use

the proper length.

• For more information, please refer to the user manual for the wall mounting

bracket.

CAUTION

• Unplug the power cord before moving or installing the monitor to avoid electric

shock.

• Installing the monitor on the ceiling or on a slanted wall may result in the monitor

falling off, which could lead to injury. Use an authorized LG wall mount and contact

the local dealer or qualified personnel.

• Applying excessive force when tightening screws may cause damage to the

monitor. Damage caused in this way will not be covered by the product warranty.

ENGLISH

• Use the wall mounting bracket and screws that conform to VESA standards.

Damage caused by the use or misuse of inappropriate components will not be

covered by the product warranty.

• When measured from the back of the monitor, the length of each installed screw

must be 8 mm (0.3 inches) or less.

Wall Mount Plate

Back of the Monitor

Screw

Dimensions

: M4 x L10

Wall Mount Plate

Back of the

Monitor

Max. 8 mm (0.3 inches)

USING THE MONITOR

• The following instructions are based on the 24GL600F model. Illustrations in this

manual may differ from the actual product.

Press the joystick button, go to Settings → Input, and then select the input option.

CAUTION

• Do not press the screen for a prolonged time. This may cause image distortion.

• Do not display a still image on the screen for a prolonged time. This may cause

image retention. Use a screensaver if possible.

NOTE

• When connecting the power cord to the outlet, use a grounded (3-hole) power

strip or a grounded power outlet.

• The monitor may flicker when turned on in an area where the temperature is low.

This is normal.

• Sometimes red, green, or blue spots may appear on the screen. This is normal.

ENGLISH

Connecting to a PC

• This monitor supports the *Plug and Play feature.

* Plug and Play: A feature that allows you to add a device to your computer without

having to reconfigure anything or install any manual drivers.

HDMI Connection

Transmits digital video and audio signals from your PC to the monitor.

CAUTION

• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility

issues.

• Use a certified cable with the HDMI logo attached. If you do not use a certified

HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI cable types

- High-Speed HDMI

cable

- High-Speed HDMI

cable with Ethernet

DisplayPort Connection

Transmits digital video and audio signals from your PC to the monitor.

DP OUT

NOTE

• There may be no video or audio output depending on the DP (DisplayPort) version

of the PC.

• Make sure to use the supplied DisplayPort cable of the product. Otherwise, this

may cause the device to malfunction.

• If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini

DisplayPort to DisplayPort) cable or gender that supports DisplayPort1.2. (sold

separately)

ENGLISH

Connecting AV Devices

HDMI Connection

HDMI transmits digital video and audio signals from your AV device to the monitor.

NOTE

• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility

issues.

• Use a certified cable with the HDMI logo attached. If you do not use a certified

HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI cable types

- High-Speed HDMI

cable

- High-Speed HDMI

cable with Ethernet

Connecting Headphones

Connect peripherals to the monitor via the headphones port.

NOTE

• Peripheral devices are sold separately.

• If you use angled earphones, it may cause a problem with connecting another external

device to the monitor. Therefore, it is recommended to use straight earphones.

Angled Straight

(Recommend)

• Depending on the audio settings of the PC and external device, headphones and

speaker functions may be limited.

ENGLISH

USER SETTINGS

Activating the Main Menu

1 Press the joystick button on the bottom of the

monitor.

2 Move the joystick up/down ( / ) and left/right

( / ) to set the options.

3 Press the joystick button once more to exit the

main menu.

Joystick Button

Button Menu Status Description

Main menu disabled Enables the main menu.

Main menu enabled

Exits the main menu.

(Holding down the button to turn off the monitor. You can

turn off the monitor this way at any time, including when the

OSD is on.)

Main menu disabled Adjusts the monitor volume level.

Main menu enabled Enters the Input features.

Main menu disabled Adjusts the monitor volume level.

Main menu enabled Enters the Settings feature.

Main menu disabled Adjusts the monitor brightness level.

Main menu enabled Turns off the monitor.

Main menu disabled Adjusts the monitor brightness level.

Main menu enabled Enters the Game Mode feature.

ENGLISH

Main Menu Features

Main Menu Description

Input Sets input mode.

Power Off Turns off the monitor.

Settings Configures the screen settings.

Game Mode Sets the game mode for gaming.

Exit Exits the main menu.

Power Off

Input Settings

Game Mode

Exit

ENGLISH

User Settings

Menu Settings

1 To view the settings menu, press the joystick button at the bottom of the monitor and then enter the Settings.

2 Configure the options by moving the joystick up/down/left/right.

3 To return to the upper settings or set other settings items, move the joystick to or press ( ).

4 If you want to exit the settings menu, move the joystick to until you exit.

Game Mode Game Adjust Picture Adjust Input General

ENGLISH

Settings Description

Game Mode Changes the game mode to the one optimized for a given feature.

Game Adjust Adjusts the 1ms Motion Blur Reduction,FreeSync,Black Stabilizer,Response Time,Cross Hair and Game Reset.

Picture Adjust Adjusts the Brightness,Contrast,Sharpness,Gamma,Color Temp,R/G/B,Black Level,DFC and Picture Reset.

Input Input List Selects the input mode.

Aspect Ratio Adjusts the aspect ratio of the screen.

General Sets Language,SMART ENERGY SAVING,Power LED,Automatic Standby,HDMI Compatibility Mode,DisplayPort 1.2,OSD

Lock,Information and Reset.

CAUTION

• Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.

ENGLISH

Adjusting the Angle

1 Place the monitor mounted on the stand base in an upright position.

2 Adjust the angle of the screen.

The angle of the screen can be adjusted forward or backward from -2° to 15° for a

comfortable viewing experience.

WARNING

• To avoid injury to the fingers when adjusting the screen, do not hold the lower part

of the monitor’s frame as illustrated below.

• Be careful not to touch or press the screen area when adjusting the angle of the

monitor.

Using the Kensington Lock

The connector for the Kensington security system is located at the bottom of the

monitor.

For more information on installation and usage, refer to the Kensington lock owner’s

manual or visit the website at http://www.kensington.com.

Connect the monitor to a table using the Kensington security system cable.

NOTE

• The Kensington security system is optional. You can obtain optional accessories

from most electronics stores.

ENGLISH

Settings > Game Adjust Description

Game Adjust

1ms Motion Blur

Reduction

This mode minimizes motion blur in fast-moving videos. To take full advantage of this function, select 1920 x 1080

@ 120Hz/144Hz before enabling 1ms Motion Blur Reduction.

This function is available for the following vertical frequency. (120Hz,144Hz)

Off

Turns 1ms Motion Blur Reduction Mode off.

NOTE

• To reduce motion blur, brightness is reduced with backlight control.

• 1ms Motion Blur Reduction and FreeSync feature can not used at the same time.

• This function is game-optimized.

• It is recommended to turn off when you are not using the gaming function.

• Flicker may occur during 1ms Motion Blur Reduction operation.

ENGLISH

Game Adjust

FreeSync

Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal.

CAUTION

• Supported Interface: DisplayPort,HDMI.

• Supported Graphic Card : A graphic card that supports AMD’s FreeSync is necessary.

• Supported Version : Make sure to update the graphic card to the latest driver.

• For more information and requirement, refer to AMD website at http://www.amd.com/FreeSync

• FreeSync and 1ms Motion Blur Reduction cannot be enabled simultaneously.

Extended

Enable wider frequency range of FreeSync function than basic mode. The screen may flicker during the game

play.

Basic Enable basic frequency range of FreeSync function.

Off FreeSync function off.

Black Stabilizer

You can control the black contrast to have better visibility in dark scenes.

You can easily distinguish objects on dark game screens.

ENGLISH

Game Adjust

Response Time

Sets a response time for displayed pictures based on the speed of the screen.

For a normal environment, it is recommended that you use Fast.

For a fast-moving picture, it is recommended that you use Faster.

Once Faster Mode is selected, Motion Blur may occur depending on the content.

Faster Sets the response time to Faster.

Fast Sets the response time to Fast.

Normal Sets the response time to Normal.

Off Does not use the response time improvement feature.

Cross Hair Cross hair provides a mark on the center of the screen for First Person Shooter (FPS) games. Users can select the cross hair that fits

their gaming environment among four different cross hairs.

• When the monitor is off or enters energy saving mode, the cross hair feature is automatically turned off.

Game Reset Returns game to the default settings.

ENGLISH

Settings > Picture Adjust Description

Picture Adjust

Brightness

Adjusts the brightness of the screen.

Contrast

Adjusts the contrast of the screen.

Sharpness Adjusts the sharpness of the screen.

Gamma

Mode 1, Mode

2, Mode 3

The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter

the image becomes.

Mode 4

If you do not need to adjust the gamma settings, select Mode 4.

Color Temp Custom The user can adjust it to red, green, or blue by customization.

Warm Sets the screen color to a reddish tone.

Medium Sets the screen color to between a red and blue tone.

Cool Sets the screen color to a bluish tone.

R/G/B

You can customize the picture color using Red, Green, and Blue colors.

Black Level

Sets the offset level (for HDMI only).

Offset: as a reference for a video signal, this is the darkest color the monitor can display.

High Keeps the current contrast ratio of the screen.

Low Lowers the black levels and raises the white levels from the current contrast ratio of the screen.

DFC

On Adjusts the brightness automatically according to the screen.

Off Disables the DFC feature.

Picture Reset Returns picture and color to the default settings.

ENGLISH

Settings > Input Description

Input

Input List Selects the input mode.

Aspect Ratio

Adjusts the aspect ratio of the screen.

Full Wide Displays the video in widescreen, regardless of the video signal input.

Original Displays video according to the aspect ratio of the video signal input.

Just Scan The aspect ratio is not adjusted from the original.

NOTE

• The display may look the same for Full Wide, Original, and Just Scan options at the recommended resolution. (1920 x

1080)

• There is no Just Scan menu on FreeSync Mode. ( Go to Picture → Game Adjust → FreeSync, to set FreeSync On or

Off)

ENGLISH

Settings > General Description

General

Language Sets the menu screen to the desired language.

SMART ENERGY

SAVING

High Saves energy using the high-efficiency SMART ENERGY SAVING feature.

Low Saves energy using the low-efficiency SMART ENERGY SAVING feature.

Off Disables the SMART ENERGY SAVING feature.

Power LED

Turns the power LED on the bottom of the monitor on or off.

On The power LED turns on automatically.

Off The power LED turns off.

Automatic

Standby

Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for

the auto-off function. (Off, 4H, 6H, and 8H)

HDMI

Compatibility

Mode

HDMI Compatibility Mode feature can recognize the legacy equipment that does not support HDMI 2.0.

Enables HDMI Compatibility Mode.

Off

Disables HDMI Compatibility Mode.

NOTE

• If the connected device does not support HDMI Compatibility Mode, the screen or sound may not work properly.

• Some older graphics cards do not support HDMI 2.0,but you can select HDMI 2.0 resolution in the control panel of window.

• This may cause the screen to appear abnormally.

DisplayPort 1.2

Enables or disables DisplayPort 1.2.

NOTE

• Be sure to configure this option according to the DisplayPort version supported by your graphics card. Set this option to Disable if

your graphics card does not support DisplayPort 1.2.

ENGLISH

General

OSD Lock

This feature disables the configuration and adjustment of menus.

On Enables OSD Lock.

Off Disables OSD Lock.

NOTE

• All features are disabled except Brightness in Picture Adjust, Input, OSD Lock and Information in General.

Information The display information will be shown the Serial Number, Total Power On Time, Resolution.

Reset Restores the default settings.

ENGLISH

TROUBLESHOOTING

Nothing is displayed on the screen.

Is the monitor's power cord plugged in? • Check if the power cord is correctly plugged into the power outlet.

Is the power LED on? • Check the power cable connection and press the power button.

Is the power on and the power LED

displaying red?

• Check that the connected input is enabled (Settings > Input).

Is the power LED blinking? • If the monitor is in sleep mode, move the mouse, or press any key on the keyboard, to switch the display on.

• Check if the computer is turned on.

Is the The screen is not currently set

to the recommended resolution. If you

have no video or the screen flickers,

see the troubleshooting guide in the

product owner’s manual. message being

displayed?

• This occurs when signals transferred from the PC (graphics card) are out of the recommended horizontal or vertical frequency

range of the monitor. Please see the Product Specification section of this manual to set the appropriate frequency.

Is the No Signal message being

displayed?

• This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and

reconnect it.

Have you installed the display driver? • Be sure to install the display driver from our web site: http://www.lg.com.

• Make sure to check if the graphics card supports Plug and Play function.

Some features are disabled.

Are some functions not available when

you press the Menu button?

• The OSD is locked. Go to Settings > General and set OSD Lock to Off.

ENGLISH

The screen retains an image.

Does image sticking occur even when the

monitor is turned off?

• Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.

• To extend the lifetime of the monitor, use a screensaver.

Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.

Did you select the appropriate resolution? • If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or

the recommended resolution.

NOTE

• Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per second, like a fluorescent lamp. The number of times the screen is refreshed

per second is called vertical frequency, or refresh rate, and is represented by Hz.

• Horizontal Frequency: The time it takes to display one horizontal line is called the horizontal cycle. If 1 is divided by the horizontal interval, the result is the number of horizontal

lines displayed per second. This is called horizontal frequency and is represented by kHz.

• Check if the graphics card’s resolution or frequency is within the range allowed by the monitor and set it to the recommended (optimal) resolution Control Panel > Display >

Settings in Windows. (The settings may differ depending on the operating system (OS) you use.)

• Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display.

• The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the

graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance.

• Some graphics cards may not support 1920 x 1080 resolution. If the resolution cannot be displayed, contact the manufacturer of your graphics card.

ENGLISH

The display color is abnormal.

Does the display appear discolored

(16 colors)?

• Set the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality. (The

settings may differ depending on the operating system (OS) you use.)

Does the display color appear unstable or

monochrome?

• Check if the signal cable is connected properly. Reconnect the cable or reinsert the PC's graphics card.

Are there spots on the screen? • When using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD

screen. It is not an error, nor is it related to the monitor's performance.

No sound from the headphone port.

Are images displayed using DP

(DisplayPort) or HDMI input without

sound?

• Make sure that the headphone port connections are made properly.

• Try increasing the volume with the joystick.

• Set the audio output of the PC to the monitor you are using. On Microsoft Windows, go to Control Panel > Hardware and

Sound > Sound > set the Monitor as default device. (The settings may differ depending on the operating system (OS) you use.)

ENGLISH

PRODUCT SPECIFICATION

LCD Screen Color Depth 8-bit color is supported.

Resolution Max Resolution 1920 x 1080 @ 144 Hz

Recommended Resolution 1920 x 1080 @ 60 Hz

Power Sources Power Rating 19 V

2.0 A

Power Consumption

(Typical)

Operating Mode: 30 W (Typical)*

Sleep Mode: ≤ 0.3 W

Off Mode: ≤ 0.3 W

AC/DC Adapter ADS-45SN-19-3 19040G, manufactured by SHENZHEN HONOR ELECTRONIC

LCAP21C, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

LCAP26B-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

LCAP26B-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

Output: 19 V

2.1 A

Environmental Conditions Operating Conditions Temperature 0 °C to 40 °C (32 °F to 104 °F)

Humidity Less than 80 %

Storing Conditions Temperature -20 °C to 60 °C (-4 °F to 140 °F)

Humidity Less than 85 %

Dimensions Monitor Size (Width x Height x Depth)

With Stand 556.8 x 419.8 x 180.6 (mm)

21.9 x 16.5 x 7.1 (inches)

Without Stand 556.8 x 333.8 x 61.1 (mm)

21.9 x 13.1 x 2.4 (inches)

ENGLISH

Weight (Without Packaging) With Stand 3.7 kg (8.14 lbs)

Without Stand 3.2 kg (7.04 lbs)

Specifications are subject to change without notice.

* The Operating Mode of Power Consumption is measured with LGE test standard. (Full White pattern, Maximum resolution)

* The Power Consumption level can be different by operating condition and monitor setting.

ENGLISH

Factory Support Mode

(Preset Mode, HDMI/ DisplayPort PC)

Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks

640 x 480 31.469 59.94 +/-

800 x 600 76.302 120 +/-

1024 x 768 97.551 120 +/-

1280 x 1024 63.194 59.96 +/-

1280 x 1024 130.035 119.96 +/-

1920 x 1080 137.26 119.98 +/-

1920 x 1080 67.50 60 +/+

1920 x 1080 84.36 74.99 +/+

1920 x 1080 113.22 99.93 -/-

1920 x 1080 158.11 144.00 +/-

ENGLISH

Connecting AV Devices

HDMI Connection

HDMI transmits digital video and audio signals from your AV device to the monitor.

NOTE

• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility

issues.

• Use a certified cable with the HDMI logo attached. If you do not use a certified

HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI cable types

- High-Speed HDMI

cable

- High-Speed HDMI

cable with Ethernet

Connecting Headphones

Connect peripherals to the monitor via the headphones port.

NOTE

• Peripheral devices are sold separately.

• If you use angled earphones, it may cause a problem with connecting another external

device to the monitor. Therefore, it is recommended to use straight earphones.

Angled Straight

(Recommend)

• Depending on the audio settings of the PC and external device, headphones and

speaker functions may be limited.

The model and serial number of the product are located on the back and on one side of

the product.

Record them below in case you ever need service.

Model

Serial No.

Supplier’s Declaration of Conformity

Trade Name LG

Responsible Party LG Electronics USA, Inc.

Address 1000 Sylvan Ave Englewood Cliffs,

NJ 07632

Telephone (201)266-2215