SMARTīDocument
Cameraā¢ 330
Userās guide
Scan the following QR code to read this guide on your smart phone or
other mobile device.
Product registration
If you register your SMART product, weāll notify you of new features and software upgrades.
Register online at smarttech.com/registration.
Keep the following information available in case you need to contact SMARTīSupport.
Serial number:
Date of purchase:
FCC warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
ā¢ Reorient or relocate the receiving antenna.
ā¢ Increase the separation between the equipment and receiver.
ā¢ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
ā¢ Consult the dealer or an experienced radio/TV technician for help.
User installer caution: Your authority to operate this FCC verified equipment could be voided if you make changes or modifications not expressly approved by the party
responsible for compliance to Part 15 of the FCC rules.
Trademark notice
SMARTīDocumentīCamera, SMARTīBoard, SMARTīNotebook, SMARTīExchange, smarttech, the SMART logo and all SMART taglines are trademarks or registered
trademarks of SMARTīTechnologiesīULC in the U.S. and/or other countries. Image Mate is a trademark or registered trademark of ELMO CO., LTD. Google and SketchUp
are trademarks of Google Inc. Adobe, Reader and Acrobat are registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other
countries. Windows, WindowsīVista and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. All other third-
party product and company names may be trademarks of their respective owners.
Copyright notice
Ā©2010ā2012īSMARTīTechnologiesīULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or
translated into any language in any form by any means without the prior written consent of SMARTīTechnologiesīULC. Information in this manual is subject to change
without notice and does not represent a commitment on the part of SMART.
Patents pending.
02/2012
Important information
W A R N I N G
l Failure to follow the installation instructions shipped with your SMART product could result in
personal injury and damage to the product.
l Ensure that any cables extending across the floor to your SMART product are properly
bundled and marked to avoid a trip hazard.
l Do not push foreign objects into the openings on your SMART product.
l Do not open or disassemble the SMART product. You risk electrical shock from the high
voltage inside the casing. Opening the casing also voids your warranty.
l The camera arm on your SMART product has joints that present a pinch hazard when you
move the camera arm. Keep clear of the pinch points.
l Do not stare into the lamp or shine the lamp directly into someoneās eyes. Turn off the lamp
when displaying or capturing images of people.
l Do not overload power outlets or extension cords as this can result in a fire or electric shock.
l Turn off and disconnect your SMART product before a thunderstorm. During a thunderstorm,
do not touch your SMART product or the power plug, because there is a risk of electrical
shock.
l To reduce the risk of fire or electric shock, do not expose the SMART product to rain or
moisture.
C A U T I O N
l Place your SMART product on a solid surface to prevent it from falling.
l If you have a security cable attached to your SMART product, do not carry or swing your
SMART product by the security cable.
l Do not connect non-shielded interface cables to your SMART product and do not leave
cables connected to unused connectors, because this can cause interference levels that
exceed FCC regulations.
l Avoid setting up and using the SMART product in an area with excessive levels of dust,
humidity and smoke.
i
l Do not block or cover the openings or slots on your SMART product. These slots provide
ventilation, ensure reliable operation and protect your SMART product from overheating.
l Do not carry your SMART product by the camera arm. Carry it by the base of the unit.
l Disconnect your SMART product from the power outlet before cleaning it. Use a clean damp
cloth and do not use liquid or aerosol cleaners or solvents when cleaning your SMART
product.
l Only use your SMART product with the type of power source that is written on the power
supply and do not modify the plug.
l Do not aim the camera lens at the sun.
l If your SMART product requires replacement parts, make sure the service technician uses
replacement parts specified by SMARTīTechnologies or parts with the same characteristics
as the original.
I M P O R T A N T I N F O R M A T I O N
ii
Contents
Important information i
Chapter 1: Overview 1
Document camera features 2
Document camera views 3
Parts of the document camera 3
Document camera software 6
Chapter 2: Setting up your SMARTīDocumentīCamera 9
Basic connection 9
Setup configurations for Camera view and SDīCard view 11
Connecting your document camera to an externalīdisplay 13
Downloading software 15
Activating SMARTīNotebook 3DīTools and MixedīRealityīTools 16
Chapter 3: Using your SMARTīDocumentīCamera 19
Understanding Computer, Camera and SD Card views 19
Performing basic operations 21
Using your document camera with SMARTīNotebook software 24
Chapter 4: Using your SMARTīDocumentīCamera in Computer view 27
Setting Computer view 27
Using Computer view 28
Chapter 5: Using your SMARTīDocumentīCamera in Camera view 29
Setting Camera view 30
Using Microscope mode 31
Using the Camera viewās on-screen display menu 31
Saving images to a memory card 40
Chapter 6: Using your SMARTīDocumentīCamera in SD Card view 43
Setting your document camera to SD Card view 43
Using the SD Card view display 44
Using the SD Card view on-screen display menu 44
Chapter 7: Using SMARTīNotebook 3DīTools and Mixed Reality Tools 51
Incorporating 3D content into your lessons 52
Getting started 52
Using the mixed reality mat 53
Inserting and manipulating 3Dīmodels 56
iii
Using Mixed Reality Tools 62
Using SketchUp sketching software and Googleī3DīWarehouse 65
Chapter 8: Troubleshooting 69
Document camera issues 69
SD Card view issues 70
Appendix A: Hardware environmental compliance 71
Waste Electrical and Electronic Equipment regulations (WEEE directive) 71
Restriction of Certain Hazardous Substances (RoHS directive) 71
Packaging 71
Chinaās Electronic Information Products regulations 72
Index 73
C O N T E N T S
iv
Chapter 1: Overview
Document camera features 2
Camera 2
Output 2
Physical construction 2
Software 2
Image storage 2
Document camera views 3
Parts of the document camera 3
Adjustable camera arm and camera head 3
Control panel 4
Rear connection panel 4
Side connection panel 5
NTSC/PAL switch 5
Mixed reality cube 5
Power supply 5
USB cable 5
VGA cable 6
Anti-glare sheet 6
Document camera software 6
SMARTīNotebook software and SMARTīProductīDrivers 6
Image Mate software (Windows only) 7
Your SMARTīDocumentīCameraā¢ 330 enables you to display 3D objects, printed documents and
microscope slides on your computer, projector or television. You can capture images and save them
to a SMARTīNotebookā¢ collaborative learning software file or to an SD or SDHC memory card.
Your document camera integrates with SMARTīNotebook software and SMARTīBoardĀ® interactive
whiteboards, creating an interactive presentation environment.
If you have a mixed reality cube and SMARTīNotebook software 10.8 or later, you can use the cube
with your document camera to manipulate 3D models in SMARTīNotebook files.
Chapter 1
1
Document camera features
Camera
l High resolution 1.3 MP CMOS sensor
l 5.2Ć optical zoom, 8Ć digital zoom
l Up to 30 frames per second
l Automatic or manual focus
l Microscope mode that doesnāt require adapters
Output
l SXGA, WXGA, 720p or XGA resolution
l DVI-D output
Physical construction
l Security lock slot
l Collapsible design for easy transport and storage
l Bright LED camera lamp
Software
l SMARTīNotebook software, including SMARTīNotebook 3DīTools and MixedīRealityīTools
software
l SMARTīProductīDrivers
l Image MateĀ® software
Image storage
l Supports memory cards with a built-in SD slot
l Supports USB memory sticks with a built in USB hub
l Supports image storage on connected computer
C H A P T E R 1
Overview
2
Document camera views
Your document camera has three views you can use to control how it sends data to a computer,
projector or television.
l Computer view displays images from your document camera in a SMARTīNotebook file on
your computer.
l Camera view controls your document camera from the cameraās control panel and displays
images on a projector or television. You can also view images through SMARTīNotebook
software.
l SD Card view controls your document camera from the cameraās control panel and displays
images from a memory card on a connected projector or television.
See Understanding Computer, Camera and SD Card views on page 19 for more information on these
views.
Parts of the document camera
Adjustable camera arm and camera head
You can unfold and adjust the camera arm. You can also rotate the camera head to display objects at
a range of angles. The camera head has a zoom dial, an auto focus button and an LED light with a
light switch.
C H A P T E R 1
Overview
3
Control panel
You can use the control panel to switch between Computer, Camera and SD Card view, capture an
image to a memory card and adjust brightness settings. You can also use it to control features and
settings in the Camera view or the SD Card viewās on-screen display menu.
N O T E
On some cameras, Camera view is represented by a symbol.
For information on views, see Understanding Computer, Camera and SD Card views on page 19.
Rear connection panel
The rear connection panel has 12V DC, DVI-D Out, VGA Out, VGAīIn, Composite video out and
USB-B connectors.
C H A P T E R 1
Overview
4
Side connection panel
The side connection panel has a security lock slot, an SD or SDHC memory card slot, a USB-A
connector, a switch for selecting VGA DVI-D or composite video output, and a switch to select either
SXGA, WXGA, 720p or XGA resolution.
NTSC/PAL switch
The NTSC/PAL switch is on the bottom of your document camera. This switch enables you to
change the format of composite video output for your television. See Switching between NTSC and
PAL on page 15.
Mixed reality cube
With a mixed reality cube, you can interact with 3D models in SMARTīNotebook
software using Mixed Reality Tools. See Using SMARTīNotebook 3DīTools and Mixed
Reality Tools on page 51.
Power supply
Your document camera comes with a power supply and a country-specific
power cable.
USB cable
Use the USB cable to connect your document camera to your computer. You can
display objects, capture images to SMARTīNotebook files and control your
document camera from SMARTīNotebook software.
C H A P T E R 1
Overview
5
VGA cable
Use the VGA cable to connect your document camera to a projector or display. You
can display objects, capture images to a memory card and use the features in the
on-screen display menus.
Anti-glare sheet
Place the anti-glare sheet over printed documents to reduce glare.
Document camera software
Your document camera includes software downloads that will help you present images from your
document camera.
SMARTīNotebook software and SMARTīProductīDrivers
Your document camera uses SMARTīNotebook software and
SMARTīProductīDrivers. SMARTīNotebook software is presentation software
designed to work with SMARTīDocumentīCameras and the touch features of
SMARTīBoard interactive whiteboards. In addition, if you have a mixed reality cube,
you can manipulate 3D models in SMARTīNotebook files using Mixed Reality Tools
(see Using SMARTīNotebook 3DīTools and Mixed Reality Tools on page 51).
You can download SMARTīNotebook software and SMARTīProductīDrivers at
smarttech.com/software.
You can find system requirements for your computer in the SMARTīNotebook software 10.8 release
notes (smarttech.com/kb/158853).
I M P O R T A N T
You need SMARTīNotebook software 10.8 or later to use SMARTīNotebook 3DīTools and Mixed
Reality Tools.
C H A P T E R 1
Overview
6
Chapter 2: Setting up your
SMARTīDocumentīCamera
Basic connection 9
Setup configurations for Camera view and SDīCard view 11
Connecting your document camera and computer to different displays 12
Connecting your document camera and computer to a shared display 12
Connecting your document camera to an externalīdisplay 13
Connecting to a projector or flat-panel display 13
Switching between VGA DVI-D and Composite output 13
Connecting to a digital projector or HD display with DVI-D 14
Connecting to a television 14
Switching between NTSC and PAL 15
Setting output resolution 15
Downloading software 15
Activating SMARTīNotebook 3DīTools and MixedīRealityīTools 16
Basic connection
Connect your SMARTīDocumentīCamera to a power supply and your computer to use your
document camera with SMARTīNotebook software.
I M P O R T A N T
This configuration requires SMARTīNotebook software. To use Camera view or SD Card view,
connect your document camera directly to an external display.
Chapter 2
9
g To connect the power supply
1. Connect the power supply cable to the 12V DC receptacle on the rear connection panel.
C A U T I O N
Ensure you connect the power cable to the power supply before connecting the power plug to
a power outlet.
2. Connect a country-specific power cable to the power supply, and then connect the plug to a
power outlet.
C H A P T E R 2
Setting up your SMARTīDocumentīCamera
10
g To connect your document camera to your computer
Connect the USB-B plug of your USB cable to your document camera, and then connect the USB-A
plug to your computer.
Setup configurations for Camera view and
SDīCard view
After you complete the basic connection procedure (see page 9), you can connect your document
camera to an external display. This enables you to use the document camera in Camera view and SD
Card view (see page 19).
You can connect your computer and your document camera to different displays or they can share a
display.
C H A P T E R 2
Setting up your SMARTīDocumentīCamera
11
Connecting your document camera and computer to different displays
In this configuration your document camera images appear on one display, and your computerās
desktop appears on the other display. You can also access document camera images through
SMARTīNotebook software on your computer.
g To connect your document camera and computer to different displays
1. Complete the basic connection steps (see page 9).
2. Connect your computer or laptop to the projector of an interactive display.
N O T E
This is the normal configuration for using interactive whiteboards.
3. Connect your document camera to another external display (see page 13).
Connecting your document camera and computer to a shared display
In this configuration your document camera is connected to your computer with both a USB and a
VGA cable. Your document camera is connected to an external display.
g To connect your document camera and computer to a shared display
1. Complete the basic connection steps (see page 9).
2. Connect your computerās VGA Out port to your document cameraās VGA In port with a VGA
cable.
3. Connect your document camera to an external display with a VGA cable (see page 13).
N O T E
DVI-D or composite video displays will not display your computer view. A VGA display is
required.
This configuration makes it easy to transition from Computer view to Camera view or SD Card
view using the same projector or display for all three views.
C H A P T E R 2
Setting up your SMARTīDocumentīCamera
12
Connecting your document camera to an
externalīdisplay
You can connect your document camera directly to an external display to enable the following
functions:
l Use Camera view to view the camera image in full-screen on the external display.
l Use SD Card view to view a full-screen slide show on the external display.
l Access the Camera viewās or SD Card viewās on-screen display menu.
Connecting to a projector or flat-panel display
You can connect your document camera to a projector or a display with the VGA cable.
C A U T I O N
Ensure your projector or display is not connected to a power outlet when connecting it to your
document camera.
g To connect to a projector or display
1. Connect the VGA cable to the VGA Out connector on the back of your document camera.
2. Connect the other end of the VGA cable to the VGA In connector on your projector or display.
Switching between VGA DVI-D and Composite output
If youāre using a projector or computer display with a VGA or DVI-D cable, switch your document
camera to VGA DVI-D mode. If youāre using a television with the Composite video cable, switch your
document camera to Composite mode.
g To switch to VGA DVI-D mode
Switch the VGA DVI-D/Composite switch on the side panel to VGA DVI-D.
g To switch to composite mode
Switch the VGA DVI-D/Composite switch on the side panel to Composite.
C H A P T E R 2
Setting up your SMARTīDocumentīCamera
13
Connecting to a digital projector or HD display with DVI-D
You can connect your document camera to a digital projector or high-definition display using a DVI-D
single link cable.
C A U T I O N
Ensure your digital projector or display is not connected to a power outlet when connecting it to your
document camera.
N O T E S
l Donāt use a DVI-I or DVI-A cable.
l You can use a DVI-D dual link cable, but it will function as a single link DVI-D.
l If you connect your document camera directly to a projector or high-definition display with a
DVI-D cable, you display only the camera image, and not your computer desktop or SMART
Notebook presentation.
g To connect to a digital projector or display
1. Connect a DVI cable from the DVI-DīOut connector on your document camera to the DVI-DīIn
connector of your digital projector or high-definition display.
2. Switch to VGA DVI-D mode (see page 13).
Connecting to a television
You can connect your document camera to a television with a Composite video cable.
C A U T I O N
Ensure your television is not connected to a power outlet when connecting it to your document
camera.
g To connect to a television
1. Connect a Composite video cable from the Composite Out connector on your document
camera to the Video In connector on your television.
2. Switch to Composite mode. See Switching between VGA DVI-D and Composite output on the
previous page.
C H A P T E R 2
Setting up your SMARTīDocumentīCamera
14
Switching between NTSC and PAL
When you connect your document camera to a television, switch it to your televisionās encoding
system (either NTSC or PAL).
g To switch between NTSC and PAL
Switch the NTSC/PAL switch on the bottom of your document camera to NTSC if your television
uses NTSC encoding, or to PAL if your television uses PAL encoding.
Setting output resolution
You can set your document cameraās output resolution to match the projector or display youāre using.
g To set the output resolution
Set the SXGA/WXGA/720p/XGA switch to match the resolution of your display. Refer to the chart
below to determine the output resolution you need.
Setting Resolution
SXGA 1280 Ć 1024
WXGA 1280 Ć 800
720p 1280 Ć 720
XGA 1024 Ć 768
Downloading software
Your document camera includes software downloads that you can use to create more effective
presentations.
g To install SMARTīNotebook software and SMARTīProductīDrivers
1. Go to smarttech.com/software.
2. Scroll to SMARTīNotebook collaborative learning software.
3. Under Choose a version, select the latest version of SMARTīNotebook software for
WindowsĀ® or Mac, and then follow the on-screen instructions.
C H A P T E R 2
Setting up your SMARTīDocumentīCamera
15
g To download and install Image Mate software
1. Visit the SMART download page at smarttech.com/software.
2. Scroll to Image Mate software for SMARTīDocumentīCameras.
3. Under Choose a version, select Image Mate 2.0 software for SMART Document Camera
330, and then follow the on-screen instructions.
Activating SMARTīNotebook 3DīTools and
MixedīRealityīTools
SMARTīNotebook 3DīTools and Mixed Reality Tools provide an intuitive way for students and
teachers to explore digital content with the SMARTīDocumentīCamera.
When you connect your document camera to your computer, SMARTīNotebook 3DīTools and Mixed
Reality Tools activate automatically. If you want to use SMARTīNotebook 3DīTools on a computer
that has never been connected to a document camera, you can activate SMARTīNotebook 3DīTools
by obtaining a product key and following the procedure below.
N O T E
You can obtain a product key for SMARTīNotebook 3DīTools by registering your document
cameraās serial number at smarttech.com/register.
g To activate SMARTīNotebook 3DīTools
1. For Windows operating systems, select Start > All Programs > SMART Technologies >
SMARTīTools > SMART Product Update.
For MacīOSīX operating system software, browse to and double-click
Applications\SMARTīTechnologies\SMARTīTools\SMARTīProduct Update.
The SMART Product Update window appears.
2. Click Activate in the SMART Notebook row.
The SMART Software Activation dialog box appears.
3. Click Add.
4. Type the product key you received from SMART in the Product Key box, and then click Add.
5. Click license agreement, review the license agreement, and then click Close.
C H A P T E R 2
Setting up your SMARTīDocumentīCamera
16
6. If you accept the license agreement, select the I accept the terms in the license agreement
check box.
7. Click Next.
SMARTīNotebook 3DīTools activates.
8. Click Finish, and then close the SMART Product Update window.
C H A P T E R 2
Setting up your SMARTīDocumentīCamera
17
Chapter 3: Using your
SMARTīDocumentīCamera
Understanding Computer, Camera and SD Card views 19
Identifying view features 20
Setting document camera views 21
Performing basic operations 21
Positioning your document camera 21
Turning you document camera on and off 22
Using the LED light 22
Displaying printed documents 22
Inserting and removing a memory card 23
Using your document camera with SMARTīNotebook software 24
Understanding Computer, Camera and SD Card
views
You can use your SMARTīDocumentīCamera in Computer, Camera and SD Card views. Each view
enables you to do different things and requires a specific connection to either a display, projector or
computer.
l Computer view
Connect your document camera to your computer with the included USB 2.0 cable, and then
set your document camera to Computer view to view document camera images only in
SMARTīNotebook software.
You can then save images to your SMARTīNotebook file for later presentation, or if your
computer is connected to an interactive whiteboard, projector or television, you can deliver your
SMARTīNotebook presentation with live images from your document camera.
See Using your SMARTīDocumentīCamera in Computer view on page 27.
Chapter 3
19
l Camera view
Connect your document camera to a projector or television, and then set your document
camera to Camera view. You can then view full-screen images from your document camera
using a projector or high-definition display, even without a computer. You can still view images
through SMARTīNotebook software.
You can use the Camera view on-screen display menu for greater control of the image, using
Microscope mode, highlight boxes, screen masks and more.
See Using your SMARTīDocumentīCamera in Camera view on page 29.
l SD Card view
Connect your document camera to a projector or television, place an SD or SDHC memory
card in your document camera, and then set your document camera to SDīCard view. You can
then view full-screen images and slide shows from the memory card directly on a projector or
high-definition display, even without a computer.
You can use the SD Card viewās on-screen display menu for greater control of the image, using
highlight boxes, screen masks and more.
See Using your SMARTīDocumentīCamera in SD Card view on page 43.
Identifying view features
The following table describes the differences between each view:
Feature description Computer
view
Camera
view
SD Card
view
View computer input (VGA In) Yes (VGA
Out only)
No No
View document camera image Yes (DVI-D
Out only)
Yes No
View pictures from a memory card No No Yes
Access memory card from computer with a USB cable Yes
1
Yes
1
Yes
1
Control document camera from computer Yes
2
Yes
2
No
Capture to SMARTīNotebook or Image Mate software Yes
2
Yes
2
No
Capture to a memory card Yes
2
Yes
2
No
Access related on-screen display menu No Yes Yes
1. Only when USB-B mode is set to SD Storage. See Setting USB-B SD Storage mode on page 40.
2. Only when USB-B mode is set to Application. See Setting USB-B Application mode on page 39.
C H A P T E R 3
Using your SMARTīDocumentīCamera
20
The following table describes outputs when your document camera is connected to a display with
VGA DVI-D or Composite Video Out:
Feature description Computer
view
Camera
view
SD Card
view
Connect to projector or display (VGA Out) VGA In Camera
image
Memory card
images
Connect to high-definition projector or display (DVI-D
Out)
Camera
image
Camera
image
Memory card
images
Connect to television (Composite Video Out) N/A Camera
image
Memory card
images
Setting document camera views
g To set Computer view
Press the Computer view button on the control panel. For more information, see page 27.
g To set Camera view
Press the Camera view button on the control panel. For more information, see page 30.
g To set SD Card view
Press the SD Card view button on the control panel. For more information, see Setting your
document camera to SD Card view on page 43.
Performing basic operations
Use the following operations when your document camera is in any view.
Positioning your document camera
The camera arm unfolds and the camera head rotates so you can position your document camera to
display objects.
C H A P T E R 3
Using your SMARTīDocumentīCamera
21
g To unfold and position your document camera
1. Place a hand on the base of the document camera to stabilize it, and then pull the camera arm
upward and forward.
2. Rotate the camera head and aim the lens at your subject.
Turning you document camera on and off
g To turn your document camera on
Press the Power button on the control panel.
The power light turns from amber to flashing green. When the light becomes solid green, your
document camera is operational.
g To turn your document camera off
Press the Power button on the control panel.
The power light turns from green to amber.
Using the LED light
You can use the LED light on the camera head to illuminate your subject.
g To turn the LED light on
Switch the LED light switch to the left. See Parts of the document camera on page 3.
C A U T I O N
Do not stare into the lamp or shine the lamp directly into someoneās eyes. Turn the light off when
displaying or capturing images of people.
Displaying printed documents
When you set your document camera to Computer view or Camera view, you can display printed
documents, use the anti-glare sheet to reduce glare, optimize the image for text documents with Text
modes and optimize the image for documents with graphics with Graphics modes.
C H A P T E R 3
Using your SMARTīDocumentīCamera
22
g To display printed documents
1. Place your documents on the table.
2. Adjust the document camera and aim its lens at your documents.
3. Rotate the zoom dial to adjust the zoom magnification.
4.
Press the Auto Focus button to adjust the focus.
g To reduce glare with the anti-glare sheet
If glare makes it difficult for you to read printed documents that youāre displaying, place the anti-glare
sheet on top of the printed materials.
g To optimize the image for text documents
1. When your document camera is in Camera view, press Menu on the control panel.
The on-screen display menu appears.
2. Select Image Setting, and then press Enter .
3. Select Image mode, and then press Enter .
4. Select either Text 1, Text 2 or Text 3, and then press Enter . See Camera view Image
Settings on-screen display menu on page 32 for an explanation of the settings.
g To optimize the image for documents with graphics
1. When your document camera is in Camera view, press Menu on the control panel.
The on-screen display menu appears.
2. Select Image Setting, and then press Enter .
3. Select Image mode, and then press Enter .
4. Select either Graphics 1 or Graphics 2, and then press Enter . See Camera view Image
Settings on-screen display menu on page 32 for an explanation of the settings.
Inserting and removing a memory card
Your document camera has a memory card slot, enabling you to save document camera images
(when your document camera is in Computer view or Camera view) or to display previously captured
images (when your document camera is in SD Card view).
C H A P T E R 3
Using your SMARTīDocumentīCamera
23
C A U T I O N
Avoid static electricity near a memory card because it can damage the card.
g To insert a memory card
1.
Press the Camera view button on the control panel.
2. Insert a memory card into the card slot on the side panel.
I M P O R T A N T
o
Set your document camera to Application mode (see Setting USB-B Application mode
on page 39) if you want to capture images to the memory card.
o
Ensure the label on the memory card is facing up.
g To remove a memory card
1.
Press the Camera view button on the control panel and wait until your document camera
displays a live image.
2. Push in the memory card to eject it, and then remove the card.
C A U T I O N
To prevent memory card damage, do not remove the memory card while capturing or deleting
images.
Using your document camera with
SMARTīNotebook software
Your SMARTīDocumentīCamera integrates with SMARTīNotebook software, enabling you to control
your document camera from your computer or from a SMARTīBoard interactive whiteboard or display.
You can display objects, capture an image and your annotations on an image to a SMARTīNotebook
page, zoom, focus and adjust brightness settings.
N O T E
For information on using SMARTīNotebook 3DīTools and Mixed Reality Tools, see Using
SMARTīNotebook 3DīTools and Mixed Reality Tools on page 51.
C H A P T E R 3
Using your SMARTīDocumentīCamera
24
g To open a SMARTīDocumentīCamera window
1. Connect your SMARTīDocumentīCamera to your computer and turn on the document camera.
2. Place the object or objects you want to display under the camera.
3.
Press SMARTīDocumentīCamera .
A SMARTīDocumentīCamera window appears.
N O T E
Alternatively, you can open the SMARTīDocumentīCamera window by pressing Capture
on the SMARTīDocumentīCamera control panel.
4. Do any of the following:
o
Press Zoom In to zoom in.
o
Press Zoom Out to zoom out.
o
Press Increase Brightness to brighten the image.
o
Press Decrease Brightness to darken the image.
o
Press Focus In or Focus Out to change the focus manually.
o
Press Autofocus to change the focus automatically.
5. Press Close when youāre done.
C H A P T E R 3
Using your SMARTīDocumentīCamera
25
g To convert the image
1. Open a SMARTīDocumentīCamera window.
2.
Press Additional Settings .
3. Do any of the following:
o
Select Rotate 180 Degrees to rotate the image 180Ā°.
o
Select Convert to Color to convert a black and white image to color.
o
Select Convert to Black and White to convert a color image to black and white.
o
Select Convert to Positive to convert a negative image to positive.
o
Select Convert to Negative to convert a positive image to negative.
g To use Microscope mode
1. Open a SMARTīDocumentīCamera window.
2.
Press Additional Settings , and then select Start Microscope Mode.
3.
When youāre done, press Additional Settings , and then select Stop Microscope Mode.
g To take a screen capture
1. Open a SMARTīDocumentīCamera window.
2.
Press Capture and Close to insert a screen capture on the current page and close the
window.
OR
Press Capture to New Page to insert a screen capture on a new page and keep the
window open.
g To take a series of screen captures
1. Open a SMARTīDocumentīCamera window.
2.
Press Capture with Time-Lapse , and then select a period of time. (For example, if you
want to take a screen capture every 15 seconds, select 15 Seconds.)
3. Press when youāre done.
C H A P T E R 3
Using your SMARTīDocumentīCamera
26
Chapter 4: Using your
SMARTīDocumentīCamera in
Computer view
Setting Computer view 27
Using Computer view 28
This view is for presenting images from your SMARTīDocumentīCamera through your
SMARTīNotebook software or Image Mate software. Connect your computer to both your document
camera and your projector, and then set your document camera to Computer view.
The interactive whiteboard or projector displays your computer desktop or SMARTīNotebook file, and
you can view or capture images from the camera.
Computer view is accessible in all computer, projector and document camera setup configurations.
Setting Computer view
I M P O R T A N T
Your document camera must be in Application mode. See Setting USB-B Application mode on
page 39.
g To set Computer view
1. Ensure your document camera is connected to your computer with the included USB 2.0 cable.
2. Ensure your computer is connected to a projector or a display.
3.
Press the Computer view button on the control panel.
Chapter 4
27
Chapter 5: Using your
SMARTīDocumentīCamera in
Camera view
Setting Camera view 30
Using Microscope mode 31
Using the Camera viewās on-screen display menu 31
Camera view Image Settings on-screen display menu 32
Camera view Special Tools on-screen display menu 34
Using the highlight feature 34
Using image masks 36
Using the scroll feature 36
Using the Picture in Picture (PiP) feature 37
Camera view Function Settings on-screen display menu 38
Setting USB-B mode 39
Setting USB-B Application mode 39
Setting USB-B SD Storage mode 40
Saving images to a memory card 40
Capturing images to a memory card 40
Transferring images from a memory card to your computer 41
Connect your SMARTīDocumentīCamera to an external display to see a full-screen image from your
document camera.
You can use your document camera in Camera view to perform the following tasks:
l Display objects
l Capture images to an SD or SDHC memory card
l Capture images to SMARTīNotebook or Image Mate software
l Use the features and settings in the on-screen display menu
Chapter 5
29
l Use Microscope mode to use your document camera with a standard microscope eyepiece
without additional adapters
Setting Camera view
Switch your document camera to Camera view to display images on a projector, flat-panel display or
television.
I M P O R T A N T
Your document camera must be connected directly to an external display. See Connecting your
document camera to an externalīdisplay on page 13.
g To switch to Camera view
1. Connect your document camera to a projector or flat-panel display with the appropriate cable
(see Connecting your document camera to an externalīdisplay on page 13).
2.
Press the Camera view button on the control panel.
g To display objects
1.
Press the Power button on the control panel.
2.
Press the Camera view button on the control panel.
3. Place the object you want to display under the camera.
4. Rotate the camera head to aim the lens at your subject.
g To adjust the zoom magnification
Rotate the zoom dial on the camera head to increase or decrease the zoom magnification.
g To automatically adjust the focus
Press the Auto Focus button on the camera head to automatically focus the image.
g To adjust brightness settings
Press the Brighten or the Darken button on the control panel.
C H A P T E R 5
Using your SMARTīDocumentīCamera in Camera view
30
Using Microscope mode
The SMART Document Camera enables you to view the microscope stage through the document
camera without additional attachments.
g To display a microscope slide
1. Place a slide or object on the stage of the microscope.
2. Focus the microscope so that the subject is in sharp focus.
3. Position the microscope under your document camera so the camera lens is aligned with the
microscope eyepiece.
C A U T I O N
Ensure you do not hit your document camera lens with the microscope. This could damage
your document cameraās lens.
4.
Press the Camera view button on the control panel.
5. Press Menu on the control panel.
6. Select the Image Setting menu.
7. Use the up and down arrow buttons to select Microscope mode, and then press Enter .
8. Use the up and down arrow buttons to select On, and then press Enter .
Using the Camera viewās on-screen display
menu
You use the on-screen display menu to adjust several settings for your document camera.
g To open the Camera viewās on-screen display menu
1. Set your document camera to Camera view.
2. Press the Menu button on the control panel.
The on-screen display menu appears.
3. Press the up and down arrow buttons on the control panel to navigate to a menu item.
4. Press the left and right arrow buttons to navigate forward or backward through menu items.
5. Press Enter to select a menu item.
C H A P T E R 5
Using your SMARTīDocumentīCamera in Camera view
31
6.
To return to the previous menu level, use the down arrow button to navigate to Back , and
then press Enter .
OR
To exit the menu, press Menu.
The following on-screen display menu options are available when your document camera is in
Camera view:
Menu Options
Image Settings Brightness, Reset Brightness, Auto focus, Focus, Shutter
Speed, White Balance, R/B-Gain, Image mode, Edge Effect,
Gamma, Image Rotation, Microscope mode, Color/B&W and
Positive/Negative. See Camera view Image Settings on-screen
display menu below.
Special Tools Highlight, Mask, Scroll and Picture in Picture. See Camera view
Special Tools on-screen display menu on page 34.
Function Settings USB-B mode, Frequency, Save Settings, Load Settings, Menu
Display and Language. See Camera view Function Settings on-
screen display menu on page 38.
Camera view Image Settings on-screen display menu
g To access the Image Settings menu
Select Camera view > Menu > Image Settings .
Image Settings menu options Description
Brightness
l
Auto Adjusts image brightness automatically
l
Manual Allows you to manually adjust image brightness
Reset Brightness
1
l
Yes Resets image brightness
l
No Cancels resetting
AF mode
l
Push
Sets the focus when you press the Auto Focus button
l
Zoom Sync Automatically sets the focus when you adjust the zoom
Focus
Allows you to manually adjust focus
C H A P T E R 5
Using your SMARTīDocumentīCamera in Camera view
32
Image Settings menu options Description
Shutter Speed
l
Slow Sets a slow shutter speed, resulting in a brighter image, but with
more blur
l
Fast Sets a fast shutter speed, resulting in a darker image, but with
less blur
White Balance
l
Auto Sets white balance automatically
l
One-Push
Sets white balance when you press the Auto Focus
button
l
Manual Allows you to manually set the White Balance, using red grain
and blue grain
R-Grain
2
Manually sets red grain
B-Grain
2
Manually sets blue grain
Image mode
l
Text 1
l
Text 2
l
Text 3
Optimizes image for displaying text documents by emphasizing
contrast. Setting is low at Text 1 and high at Text 3.
l
Graphics 1 Optimizes image for displaying graphics. Displays Edge Effect
and Gamma icons.
l
Graphics 2 Optimizes image from DLP projector
Edge Effect
3
Emphasizes image outlines. Set to Low, Middle or High.
Gamma
3
Sets Gamma for the image. Set to Low, Middle or High.
Image Rotation
l
Off Displays normal image rotation
l
On Rotates image 180Ā°
Microscope mode
l
On Turns on Microscope mode
l
Off Turns off Microscope mode
Color/B&W
l
Color Displays color images
l
B&W Displays black and white images
Positive/Negative
l
Positive Displays normal image
l
Negative Displays film negative image
C H A P T E R 5
Using your SMARTīDocumentīCamera in Camera view
33
1. Visible only when Brightness is set to Auto
2. Visible only when White Balance is set to Manual
3. Visible only when Image mode is set to Graphics 1
Camera view Special Tools on-screen display menu
g To access the Special Tools menu
Select Camera view > Menu > Special Tools .
Special Tools menu options Description
Highlight
l
Highlight On
l
Adjust Transparency
l
Adjust Size
Highlights a center square on the displayed image
Mask
l
Mask On
l
Adjust Transparency
Covers the displayed image with an adjustable screen mask
Scroll
l
Scroll on
l
Ć2
l
Ć3
l
Ć4
Zooms in on the displayed images and enables you to move the
zoomed area with the up, down, left and right arrow buttons on
the control panel
PiP
Takes a picture, and then displays that picture in a corner of the
screen while you move or zoom the camera
Using the highlight feature
When you use the highlight feature, a square in the center of the displayed image highlights your
subject. You can change the size, transparency and position of the highlight square.
N O T E
The highlight feature is for display purposes only. If you capture an image while the highlight square
is on, the image doesnāt include the highlight.
C H A P T E R 5
Using your SMARTīDocumentīCamera in Camera view
34
g To use the highlight feature
1. Display an object in Camera view, and then press Menu on the control panel.
The on-screen display menu appears.
2.
Press the up and down arrow buttons to select Special Tools , and then press Enter .
3. Use the up and down arrow buttons to select Highlight > Highlight On, and then press Enter
.
Your document camera highlights a square in the center of the image and obscures the edges
of the image.
g To move the highlight square
Use the up, down, right and left arrow buttons to move the highlight square.
g To change highlight transparency
1. Press Menu.
The on-screen display menu appears.
2.
Press the up and down arrow buttons to select Special Tools , and then press Enter .
3. Press the up and down arrow buttons to select Highlight On, and then press Enter .
4. Press the up and down arrows to select Highlight transparency.
5. Press Enter to save your settings.
g To change the highlight area size
1. Press the Menu button on the control panel.
The on-screen display menu appears.
2.
Press the up and down arrow buttons to select Special Tools , and then press Enter .
3. Press the up and down arrow buttons to select Highlight, and then press Enter .
4. Select Adjust size, and then press Enter .
5. Press the up, down, left and right arrow buttons to change the highlight area size.
6. Press Enter to save your settings.
g To turn off the highlight feature
Press Enter .
C H A P T E R 5
Using your SMARTīDocumentīCamera in Camera view
35
Using image masks
Image masks obscure most of the image. You can resize or move the mask to reveal more of the
image.
N O T E
The image mask feature is for display purposes only. If you capture an image while the imageīmask
is on, the image doesnāt include the image mask.
g To use an image mask
1. Display an object in Camera view, and then press Menu on the control panel.
The on-screen display menu appears.
2.
Press the up and down arrow buttons to select Special Tools , and then press Enter .
3. Press the up and down arrow buttons to select Mask on, and then press Enter .
An image mask appears on the image.
g To move the image mask
Press the up, down, right and left arrow buttons to move the mask area.
g To change image mask transparency
1. Press Menu.
The on-screen display menu appears.
2.
Press the up and down arrow buttons to select Special Tools , and then press Enter .
3. Press the up and down arrow buttons to select Image Mask Transparency, and then press
Enter .
4. Press the up and down arrows to select Adjust transparency.
5. Press Enter to save your settings.
g To turn off an image mask
Press Enter .
Using the scroll feature
The scroll feature zooms in on the image and allows you to move the zoomed area with the arrow
buttons.
C H A P T E R 5
Using your SMARTīDocumentīCamera in Camera view
36
N O T E
The scroll feature is for display purposes only. If you capture an image while the scroll is on, the
captured image is the unscrolled image.
g To display the scroll feature
1. Display an object in Camera view, and then press Menu on the control panel.
The on-screen display menu appears.
2. Press the up and down arrow buttons to select Special Tools, and then press Enter .
3. Press the up and down arrow buttons to select Scroll, and then press Enter .
4. Press the up and down arrow buttons to select Scroll On, and then press Enter .
Your document camera displays a zoomed area of the image.
g To move the zoomed scroll area
Use the up, down, right and left arrows to move the zoomed scroll area.
g To change the scroll area magnification
When setting the scroll feature, select either Ć2, Ć3 or Ć4, and then press Enter .
Using the Picture in Picture (PiP) feature
The Picture in Picture (PiP) feature captures a temporary image from your document camera, and
then displays it in one corner of the display. You can then change what is under the camera without
the temporary image changing.
N O T E
The PiP feature is for display purposes only. If you capture an image while the PiP is on, the image
doesnāt include the PiP.
g To display the PiP image
1. Display an object in Camera view, and then press Menu on the control panel.
The on-screen display menu appears.
2. Press the up and down arrow buttons to select Special Tools, and then press Enter .
3. Press the up and down arrow buttons to select PiP, and then press Enter .
Your document camera displays a picture in picture image.
C H A P T E R 5
Using your SMARTīDocumentīCamera in Camera view
37
g To move the PiP image
When displaying the PiP image, press the up, down, left and right arrow buttons on the control panel
to move the image.
g To turn off the PiP setting
Press Enter on the control panel.
Camera view Function Settings on-screen display menu
g To access the Functions Settings menu
Select Camera view > Menu > Function Settings .
Function Settings menu
options
Description
USB-B mode
l
SD Storage Allows you to copy or view your memory card from your
computer. See Setting USB-B SD Storage mode on page 40.
l
Application Use SMARTīNotebook software to control your document
camera, and more. See Setting USB-B Application mode on the
next page.
Frequency
l
60 Hz Sets frequency at 60 Hz
l
50 Hz Sets frequency at 50 Hz
Save Setting
l
1 Saves presets for setting 1
l
2 Saves presets for setting 2
l
3 Saves presets for setting 3
l
4 [Power On] Saves presets for when you turn your document camera on
l
Cancel Cancels preset save
Load Setting
l
1 Loads preset 1
l
2 Loads preset 2
l
3 Loads preset 3
l
Default Loads default settings
C H A P T E R 5
Using your SMARTīDocumentīCamera in Camera view
38
Function Settings menu
options
Description
l
4 [Power On] Loads preset for when you turn your document camera on
l
Cancel Cancels load setting
Menu Display
l
On Turns on menu display
l
Off Turns off menu display
Language
l
English Sets language to English
l
FranƧais Sets language to French
l
Deutch Sets language to German
l
EspaƱol Sets language to Spanish
Setting USB-B mode
USB-B mode sets how your document camera, your computer and a memory card interact.
g To access the USB-B mode setting
Select Camera view > Menu > Function Settings > USB-B mode .
Action SD Storage
mode
Application
mode
See the memory card from your computer Yes No
View and use your document camera from
SMARTīNotebook or Image Mate software
No Yes
Capture image to the memory card in both Computer view
and Camera view
No Yes
SD Card view menu includes SD Settings No Yes
Setting USB-B Application mode
To use your document camera with your computer, you must set it to Application mode in the Camera
view on-screen display menu.
I M P O R T A N T
Your document camera must be in Camera view to set it to Application mode. It cannot be in
Computer view or SD Card view.
C H A P T E R 5
Using your SMARTīDocumentīCamera in Camera view
39
g To set your document camera to Application mode
1. Connect your document camera to a projector or flat-panel display with the VGA cable (see
page 13).
2. Turn on your computer, and set it to Camera view.
3. Press Menu on the control panel.
The on-screen display menu appears.
4. Press the up and down arrow buttons on the control panel to select Function Setting, and then
press Enter .
5. Select USB-B mode, and then press Enter .
6. Select Application and then press Enter .
Setting USB-B SD Storage mode
This mode enables you to see the contents of your memory card from your computer.
g To set SD Storage mode
1. Connect your document camera to a projector, flat-panel display or television (see page 13).
2. Press Menu on the control panel.
The on-screen display menu appears.
3. Press the up and down arrow buttons on the control panel to select Function Setting, and then
press Enter .
4. Select USB-B mode, and then press Enter .
5. Select SD Storage and then press Enter .
Saving images to a memory card
You can capture images to a memory card when your document camera is in Camera view.
Capturing images to a memory card
g To capture images to a memory card
1. Set your document camera to Camera view. See Setting Camera view on page 30.
2. Position your document camera.
C H A P T E R 5
Using your SMARTīDocumentīCamera in Camera view
40
3. Make any camera settings you require using the Camera viewās on-screen display menu.
4.
Press the Capture button on the document camera control panel.
The camera capture icon appears, indicating that a photo is being taken.
I M P O R T A N T
If you do not see the camera capture icon, ensure your document cameraās USB-B mode is
set to Application. See Setting USB-B Application mode on page 39.
Transferring images from a memory card to your computer
You can transfer images from a memory card to your computer.
g To transfer images to your computer
1. Set your document camera to SD Storage mode. See Setting USB-B SD Storage mode on the
previous page.
2. Connect your document camera to your computer with the USB cable (see Basic connection
on page 9).
Your computer recognizes your document camera and memory card as a removable disk.
3. Browse to the removable disk on your computer, and then transfer the images to your
computer.
C H A P T E R 5
Using your SMARTīDocumentīCamera in Camera view
41
Chapter 6: Using your
SMARTīDocumentīCamera in
SD Card view
Setting your document camera to SD Card view 43
Using the SD Card view display 44
Using the SD Card view on-screen display menu 44
SD Card viewās on-screen display menu options 44
SD Settings on-screen display menu 45
Deleting images from a memory card 46
Locking and unlocking images 46
Special Tools on-screen display menu 48
Slideshow Settings on-screen display menu 49
Showing slideshows 49
Displaying specific images in a slideshow 50
When you set your SMARTīDocumentīCamera to SD Card view, your document camera acts as an
SD or SDHC memory card reader, displaying previously captured images either individually or as a
slide show. Your computer isnāt used in an SD Card presentation.
Setting your document camera to SD Card view
g To set SD Card view
1. Ensure your document camera is connected directly to a projector or another display. For
connection information, see page 11.
2. Insert a memory card in your document camera.
3.
Press the SD Card view button on the control panel.
Chapter 6
43
Using the SD Card view display
g To display images
1.
Press the SD Card view button on the control panel.
2. Use the left and right arrow buttons on the control panel to scroll through images on the memory
card.
g To display and select thumbnail images
1.
Press the SD Card view button on the control panel.
2. Press Enter to display up to 16 thumbnail-sized images.
g To return to displaying single images
Press Enter to display a single image.
Using the SD Card view on-screen display menu
The SD Card viewās on-screen displayās menu enables you to use the document camera as a
memory card reader.
SD Card viewās on-screen display menu options
The following on-screen display menu options are available when your document camera is in SD
Card view.
Menu Options
SD Settings Delete, Lock, Unlock and Format Media. See Setting USB-B
Application mode on page 39.
Your document cameraās USB-B mode must be set to Application to
see this menu. See SD Settings on-screen display menu on the next
page.
Special Tools Highlight, Mask and Scroll. See Special Tools on-screen display
menu on page 48.
Slide Show Start Slideshow, Interval, Select, Repeat and Order. See Slideshow
Settings on-screen display menu on page 49.
C H A P T E R 6
Using your SMARTīDocumentīCamera in SD Card view
44
SD Settings on-screen display menu
g To access the SD Settings menu
Select SD Card view > Menu > SD Settings .
I M P O R T A N T
The SD Settings are available only if you have your document camera set to Application mode in
the Camera view on-screen display menu. See Setting USB-B Application mode on page 39.
SD Settings menu options Description
Delete
l
Current Deletes current image
l
All Deletes all images in the current folder
l
Cancel Cancels image delete
Lock
l
Current Locks current image
l
All Locks all images
l
Cancel Cancels image lock
Unlock
l
Current Unlocks current image
l
All Unlocks all images
l
Cancel Exits Unlock settings
Format Media
l
No Cancels memory card formatting
l
Yes Formats memory card
C H A P T E R 6
Using your SMARTīDocumentīCamera in SD Card view
45
Deleting images from a memory card
You can delete images from a memory card in your document camera using the on-screen display
menu.
I M P O R T A N T
l Your document camera must be set to Application mode. See Setting USB-B Application
mode on page 39.
l You are unable to delete images from your computer, only from the document cameraās
memory card.
g To delete images
1.
Press the SD Card view button on the control panel.
You see the current saved image from the memory card.
2. Use the left and right arrow buttons on the control panel to select the image you want to delete.
3. Press Menu on the control panel.
The on-screen display menu appears.
4. Select SD, and then press Enter .
5. Select Delete, and then press Enter .
6. Select Current, and then press Enter to delete the current image.
OR
Select All, and then press Enter to delete all images in the viewed folder.
The deleting image icon displays briefly while your document camera deletes images.
Locking and unlocking images
You can lock images to include them in slideshows set to Select > Lock in the Slideshow menu.
I M P O R T A N T
If you are unable to access the SD Menu, you must set your document cameraās USB-B mode to
Application. This is a Camera view menu setting. See Setting USB-B Application mode on page
39.
C H A P T E R 6
Using your SMARTīDocumentīCamera in SD Card view
46
g To lock images for a slideshow
1.
Press the SD Card view button on the control panel.
2. Use the arrow buttons on the control panel to select the image you want to lock, and then press
the Menu button.
The on-screen display menu appears.
3. Select SD > Lock, and then press Enter .
4. Select Current, and then press Enter .
OR
Select All to lock all images.
Repeat steps 1 to 3 to lock other images for your slideshow.
g To unlock images for a slideshow
1. In SD Card view, use the arrow buttons on the control panel to select the image you want to
unlock, and press the Menu button.
The on-screen display menu appears.
2. Select SD > Unlock, and then press Enter .
3. Select Current, and then press Enter .
OR
Select All to unlock all images.
Repeat steps 1 to 3 to unlock other images for your slideshow.
C H A P T E R 6
Using your SMARTīDocumentīCamera in SD Card view
47
Special Tools on-screen display menu
g To access the Special Tools menu
Select SD Card view > Menu > Special Tools .
Special Tools menu options Description
Highlight
l
Highlight On
l
Adjust Transparency
l
Adjust Size
Highlights a center square on the displayed image
Mask
l
Mask On
l
Adjust Transparency
Covers the displayed image with an adjustable screen mask
Scroll
l
Scroll on
l
Ć2
l
Ć3
l
Ć4
Zooms in on the displayed images and enables you to move the
zoomed area with the up, down, left and right arrow buttons on
the control panel
The SD Card viewās Special Tools menu includes the same tools as the Camera viewās Special
Tools menu, except that the SD Card view doesnāt have the Picture in Picture (PiP) feature.
l For information on how to use the Highlight feature, see Using the highlight feature on page 34.
l For information on how to use the Mask feature, see Using image masks on page 36.
l For information on how to use the Scroll feature, see Using the scroll feature on page 36.
C H A P T E R 6
Using your SMARTīDocumentīCamera in SD Card view
48
Slideshow Settings on-screen display menu
g To access the Slideshow Settings menu
Select SD Card view > Menu > Slideshow .
Slideshow menu options Description
Start Slideshow
Starts a slideshow of images
Interval
l
5 sec Sets image interval to 5 seconds
l
10 sec Sets image interval to 10 seconds
l
15 sec Sets image interval to 15 seconds
l
30 sec Sets image interval to 30 seconds
Select
l
All Selects all images for slideshow
l
Lock Sets so only locked images display in a slideshow
Repeat
l
Off Turns off slideshow repeat
l
On Turns on slideshow repeat
Order
l
Forward Sets slideshow order to forward
l
Backward Sets slideshow order to backward
Showing slideshows
g To start a slideshow
1. Access the Slideshow menu.
2. Select Slideshow, and then press Enter .
3. Select Start Slideshow, and press Enter .
Your document camera displays a slideshow of images on the memory card.
g To stop a slideshow
Press Enter or any of the arrow buttons on the control panel.
The image slideshow stops and the on-screen display menu appears.
C H A P T E R 6
Using your SMARTīDocumentīCamera in SD Card view
49
Displaying specific images in a slideshow
You can set your document camera to display only images that you select.
g To set SD settings to display selected images only
1. In SD Card view, press Menu on the control panel.
The on-screen display menu appears.
2. Select Slideshow > Select, and then press Enter .
3. Select Lock, and then press Enter so that only locked images display in a slideshow.
I M P O R T A N T
When you set the slideshow to Lock, it will include only images that are locked. You lock
images in the SD Card viewās SD menu, not the Slideshow menu.
g To lock images
See Locking and unlocking images on page 46.
g To unlock images
See Locking and unlocking images on page 46.
C H A P T E R 6
Using your SMARTīDocumentīCamera in SD Card view
50
Chapter 7: Using SMARTīNotebook
3DīTools and Mixed Reality
Tools
Incorporating 3D content into your lessons 52
Getting started 52
Hardware and software requirements 52
Lighting requirements 53
Using the mixed reality mat 53
Inserting and manipulating 3Dīmodels 56
Inserting 3D models 56
Manipulating 3D models 57
Rotating a 3Dīmodel 57
Pausing, playing and restarting animation 58
Adding labels 59
Navigating 3D scenes 60
Using Mixed Reality Tools 62
Manipulating 3D models using Mixed Reality Tools 62
Disguising 3D models before presenting them 64
Using SketchUp sketching software and Googleī3DīWarehouse 65
Using SketchUp sketching software 65
Using Google 3D Warehouse 66
Your SMARTīDocumentīCamera can transform any classroom or lecture hall into a spontaneous and
interactive learning environment. It uses a high-resolution video camera to display clear and detailed
images of written material or any physical object.
SMARTīNotebook 3DīTools and Mixed Reality Tools take this experience to a new level by providing
teachers and students with a new way to engage with digital 3D content.
This chapter provides the information you need to begin using SMARTīNotebook 3DīTools and Mixed
Reality Tools with your SMARTīDocumentīCamera as well as SketchUpā¢ sketching software and
Googleā¢ 3DīWarehouse.
Chapter 7
51
SMARTīNotebook 3DīTools and Mixed Reality Tools provide an intuitive way for students and
teachers to explore digital content with the document camera. This technology is integrated with
SMARTīNotebook software.
Incorporating 3D content into your lessons
You can incorporate 3D content into your SMARTīNotebook software lessons. The following are
examples of how to do this:
l If youāre teaching a biology lesson, insert a 3D model of a heart into your .notebook file. Rotate
and change the size of the 3D model to present the different parts of the heart.
l If youāre teaching an English lesson, insert a 3D model of a city that is referenced in a novel the
class is reading. Enter the 3Dīscene to navigate streets and interiors of buildings.
l If youāre teaching a primary lesson, insert multiple 3D models and use the Disguise feature to
reveal answers as a memory exercise.
Getting started
Hardware and software requirements
To get started with Mixed Reality Tools, you need the following:
l SMARTīNotebook software 11
l SMARTīDocumentīCamera 330
l A mixed reality cube
l A Windows computer meeting the following requirements:
o
PentiumĀ® 4 processor or better
o
512 MB of RAM (1īGBīrecommended)
o
2 GB of free hard disk space
o
Windows XP SP3, WindowsīVistaĀ® SP2 or Windows 7 operatingīsystem
o
DirectXĀ® 9 compatible graphics hardware
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
52
l A Mac computer meeting the following requirements:
o
1.5 GHz IntelĀ® processor or better
o
1 GB of RAM
o
1 GB of free hard disk space for minimum installation (2 GB for full installation with
Gallery collections)
o
MacīOSīX 10.6 operating system software or later
Lighting requirements
Mixed Reality Tools works best in a bright room where the work surface doesnāt have any noticeable
shadows or glare.
The light must be as uniform as possible, shining on the cube and background. You can achieve this
by setting up the document camera so that the camera is facing directly down, perpendicular to a
uniform, neutral work surface. The work surface should not be darker than the black elements on the
mixed reality cube or lighter than the white elements on the cube.
N O T E S
l In very bright rooms, the work surface can appear whiter than the white elements on the
cube.
l You can print a mixed reality mat and place it under the document camera to increase
contrast between the cube and the background (see Using the mixed reality mat below).
A typical projector room is usually quite dark. For Mixed Reality Tools to work properly, the document
cameraās light should be turned on. Donāt manipulate the cube more than 14" (35 cm) from the
document camera.
N O T E
If SMARTīNotebook software doesnāt enter MixedīReality mode when you hold the cube under the
camera, shake the cube under the camera. If the issue persists, press and hold the brighten button
on the document camera to maximize the brightness.
Using the mixed reality mat
To increase the contrast between the mixed reality cube and background, you can use the mixed
reality mat available from the SMARTīSupport website. The mat includes marks that indicate the area
in which you can move the cube while in MixedīReality mode.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
53
To print the mixed reality mat, you need the following items:
l A computer with Internet access and AdobeĀ®īReaderĀ® or AcrobatĀ® software.
l A printer
l Tape
g To print the mixed reality mat
1. Open the appropriate mixed reality mat file in AdobeīReader or Acrobat.
Region Page size Link
U.S. and Canada Letter (8 1/2" Ć 11") smarttech.com/kb/160487
Elsewhere A4 smarttech.com/kb/160488
2. Select File > Print.
The Print dialog box appears.
3. Select None in the Page Scaling drop-down list, clear the Auto-Rotate and Center check
box, and then press OK.
4. Arrange the pages:
o
Page 1 is top left.
o
Page 2 is top right.
o
Page 3 is bottom left.
o
Page 4 is bottom right.
Set page 1 as the bottom page in your stack.
5. Overlap, orient and align the pages according to the guidelines, and then tape the pages
together.
N O T E
Due to different page sizes and printing options, your pages may not align perfectly onto the
guidelines. If that is the case, align the pages to the central crosshairs.
T I P S
o
Use a light table or a tablet device set to a white background as an aid when aligning
the pages.
o
To make the mat last longer, consider printing it on heavy cardstock.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
54
g To use the mixed reality mat
1. Place the mixed reality mat on your work surface.
2. Place the document camera over the darkened area on the mat.
3. Rotate the bottom arm of the document camera so that itās 90Ā° from your work surface.
4. Rotate the upper arm of the document camera upward until itās at its highest spot, ensuring the
bottom arm is still set to 90Ā°.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
55
5. Turn on the document camera.
N O T E S
o
The document camera image should show the target area in the center. You can adjust
the mat slightly if necessary.
o
The lines on the mat indicate where you can position the mixed reality cube while in
Mixed Reality mode (see Manipulating 3D models using Mixed Reality Tools on page
62).
Inserting and manipulating 3Dīmodels
To use SMARTīNotebook 3DīTools software, you need to insert a 3D model in your .notebook file.
After you insert a 3D model, you can manipulate it in the same way you manipulate other objects in
SMARTīNotebook software.
N O T E
You can insert 2D images and 3D models on the same page and manipulate them the same way
you manipulate other objects in SMARTīNotebook software.
Inserting 3D models
3D models are available from the 3D Objects folder in Lesson Activity Examples and the
SMARTīExchangeā¢ website (exchange.smarttech.com) as well as the Google 3D Warehouse (see
Using Google 3D Warehouse on page 66). You can also insert your own 3D models if they are in one
of the following formats:
l COLLADA (.dae)
l 3D Object (.obj)
l FBX (.fbx)
N O T E
Textures and other information for some 3D models are stored in separate files and folders. When
you insert these 3D models, ensure the 3D model file is located in the correct folder structure with
the supporting files and folders.
g To insert a 3D model
1. Select Insert > 3D File.
The Insert 3D File dialog box appears.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
56
2. Browse to and select the 3D model you want to insert.
3. Press Open.
The 3D model appears on the page.
Manipulating 3D models
After inserting a 3D model, you can manipulate it in the same way you manipulate other objects in
SMARTīNotebook software. In particular, you can do the following:
l Cut, copy and paste
l Clone
l Move
l Scale
l Lock
l Attach links and sounds
l Add to the Gallery tab
N O T E S
l For information on these basic options, see the Help for SMARTīNotebook software.
l When you add a 3D model to the Gallery tab, it appears in the 3D Objects category.
In addition to these basic options, you can do the following:
l Rotate the 3D model
l Pause, resume, play and restart animation
l Add labels
Rotating a 3Dīmodel
You can rotate a 3D model along multiple axes. After rotating a 3D model, you can reset it to its
original orientation.
g To rotate a 3D model along a single axis
1. Select the 3D model.
2. Press and hold one of the side rotation handles.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
57
3. Drag your finger around the center of the 3Dīmodel, and then release your finger when done.
g To rotate a 3D model along multiple axes
1. Select the 3D model.
2. Press and hold the center rotation handle.
3. Drag your finger in the direction you want to rotate the 3D model, and then release your finger
when done.
g To reset a 3D model to its original orientation
1. Select the 3D model.
2. Press the 3D modelās menu arrow, and then select Reset Rotation.
Pausing, playing and restarting animation
If a 3D model contains animation, you can pause, resume and restart the animation.
N O T E
If a 3D model doesnāt contain animation, the Animation menu documented in the following
procedures is disabled.
g To pause animation
1. Select the 3D model.
2. Press the 3D modelās menu arrow, and then select Animation > Play/Pause Animation.
g To resume playing animation
1. Select the 3D model.
2. Press the 3D modelās menu arrow, and then select Animation > Play/Pause Animation.
g To restart animation
1. Select the 3D model.
2. Press the 3D modelās menu arrow, and then select Animation > Restart Animation.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
58
Adding labels
You can use labels to highlight different components of a 3D model. Labels can be text, shapes or
other 2D objects.
g To add a label
1. Select the 3D model.
2. Right-click the 3D model where you want to connect the label, and then select Add Label.
A label appears.
3. To use text in the label, double-click the labelās default text and then type your own text.
OR
To use a shape or other 2D object in the label, create the object and then drag it into the label.
4. Optionally, drag the labelās connection point to a different location on the 3D model.
g To hide and display a label
1. Press the labelās connection point on the 3D model.
The label is hidden.
2. Press the labelās connection point to display the label.
g To remove a label
1. Select the label.
2.
Press Close .
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
59
Navigating 3D scenes
Large 3D models that contain internal details are called 3D scenes. You can navigate 3D scenes
using controls in SMARTīNotebook software.
N O T E S
l You can use the navigation controls to navigate any 3D model. However, not all 3D models
contain internal details. If you enter a 3D model that doesnāt contain internal details, the
interior appears empty or dark.
l If youāre using MacīOSīX operating system software, youāre unable to enter a 3D scene while
in Full Screen mode. To enter a 3D scene, first exit Full Screen mode and then complete the
following procedure.
g To navigate a 3D scene
1. Select a 3D model.
2. Press the 3D modelās menu arrow, and then select Enter 3D Scene.
SMARTīNotebook software displays the 3D scene in Full Screen mode. A map of the 3D
scene, navigation controls and the Close button appear.
T I P S
o
You can press the gray border of the map to drag it to another area of the page if itās
covering materials you want to present. You can also resize the map by pressing and
dragging the gray border in the lower-right corner.
o
You can press the gray background or center icon of a navigation control to drag it to
another area of the page if itās covering materials you want to present.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
60
3. Navigate the 3D scene using the navigation controls.
Button Use to:
A Change your orientation upward.
B Change your orientation to the left.
C Change your orientation to the right.
D Change your orientation downward.
E Raise elevation.
F Move forward in the scene.
G Move to the left in the scene.
H Move to the right in the scene.
I Move backward in the scene.
J Lower elevation.
Alternatively, you can use keyboard buttons to navigate the 3D scene.
Keyboard button Use to:
W Change your orientation upward.
A Change your orientation to the left.
D Change your orientation to the right.
S Change your orientation downward.
PAGEīUP Raise elevation.
UPīARROW Move forward in the scene.
LEFTīARROW Move to the left in the scene.
RIGHTīARROW Move to the right in the scene.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
61
Keyboard button Use to:
DOWNīARROW Move backward in the scene.
PAGEīDOWN Lower elevation.
ESC Close
N O T E
As you navigate the 3D scene, a red indicator in the map displays where you are in the scene
and the direction you are viewing. The arrow in the center indicates orientation. The arrow
becomes a circle when youāre facing directly up or down.
Level Incline Decline
Off-screen (level) Upward Downward
4. Press Close when youāre done.
Using Mixed Reality Tools
After inserting 3D models in your .notebook files using SMARTīNotebook 3DīTools, you can
manipulate those models using MixedīReality Tools.
Manipulating 3D models using Mixed Reality Tools
You manipulate 3D models using your SMARTīDocumentīCamera and the mixed reality cube.
g To manipulate a 3D model using the mixed reality cube
1. Connect your SMARTīDocumentīCamera to your computer and turn on the document camera.
2. Open the .notebook file, and then display the page containing the 3D model.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
62
3. Place the mixed reality cube under the SMARTīDocumentīCamera, showing one side of the
cube to the camera.
SMARTīNotebook software enters Mixed Reality mode and assigns the 3D model to the cube.
If there is more than one 3D model on the page, move the cube until the animation on the page
indicates that the cube is connected to the 3Dīmodel you want to manipulate.
N O T E
SMARTīNotebook software enters Mixed Reality mode in this situation only if a 3D model is
on the page. Alternatively, you can enter Mixed Reality mode by pressing SMART
Document Camera in the toolbar, and then pressing Start Mixed Reality in the
SMARTīDocumentīCamera window.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
63
4. Do any of the following:
o
To move the 3D model on the screen, move the cube.
o
To rotate the 3D model on the screen, rotate the cube in your hand.
o
To unassign the 3D model from the cube, cover the cubeās markings with your hand.
N O T E
If you experience any of the following symptoms, the cause may be issues with tracking:
o
The 3D model doesnāt connect to the cube.
o
The 3D model shakes when itās connected to the cube.
o
The 3D model sporadically disconnects from the cube.
o
SMARTīNotebook software enters Mixed Reality mode when the cube is under the
camera even if you arenāt moving the cube.
To address tracking issues, see Lighting requirements on page 53.
T I P S
o
As you move and rotate the cube in your hand, ensure you donāt cover the symbols on
the cubeās surface.
o
To hide the image from the SMARTīDocumentīCamera and show only the 3D model,
move the transparency slider to the left.
5. If youāve purchased a second cube from SMART and there is more than one 3D model on the
page, manipulate another 3D model by completing steps 3 and 4 with the other cube.
N O T E
The two cubes must have different patterns if you want to use them both at the same time.
6. When youāre done, move the cube (or cubes) away from the camera.
SMARTīNotebook software exits Mixed Reality mode after a few seconds.
Disguising 3D models before presenting them
If you want to hide 3D models in your .notebook file before presenting them, you can use the Disguise
feature to hide the 3D models with a magic hat.
When you use Mixed Reality Tools, the magic hat disappears after Mixed Reality Tools assigns the
3D model to the cube, revealing the 3D model.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
64
N O T E
If you hide multiple 3D models on the same page with magic hats, each magic hat has a different
colored ribbon.
g To hide a 3D model with a magic hat
1. Select the 3D model.
2. Press the 3D modelās menu arrow, and then select Disguise > Disguised.
g To change the magic hatās color
1. Select the magic hat.
2. Press the magic hatās menu arrow, and then select Disguise > Change Color.
g To reveal a 3D model under a magic hat
Use Mixed Reality Tools as described in Manipulating 3D models using Mixed Reality Tools on page
62.
After Mixed Reality Tools assigns the 3D model to the cube, stars swirl around the magic hat, and
then the magic hat disappears, revealing the 3D model behind it.
T I P
You can also reveal the 3D model by pressing the hat icon in the lower-left corner.
Using SketchUp sketching software and
Googleī3DīWarehouse
Google offers two 3D tools that you can use with SMARTīNotebook 3DīTools and Mixed Reality
Tools:
l SketchUp sketching software
l Google 3D Warehouse
Using SketchUp sketching software
You can use SketchUp sketching software to create 3D models. You can save these 3D models in
COLLADA (.dae) format and then insert them in SMARTīNotebook software.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
65
g To save a 3D model in .dae format
1. Open the 3D model in SketchUp sketching software.
2. Select File > Export > 3D Model.
The Export Model dialog box appears.
3. Browse to where you want to save the file.
4. Type a name for the file in the File name box.
5. Select COLLADA File (*.dae) in the Export type drop-down list.
6. Press Export.
g To insert the 3D model in SMARTīNotebook software
See Inserting 3D models on page 56.
Using Google 3D Warehouse
Google 3D Warehouse is an online repository of 3D models. The Gallery tab in SMARTīNotebook
software includes a link to Google 3D Warehouse. Using this link, you can search for 3D models and
download them to your computer. You can then insert the 3D models into your .notebook files.
g To download 3D models from Google 3D Warehouse
1.
Press the Gallery tab.
2. Press Google 3D Warehouse.
Google 3D Warehouse appears in the bottom section of the Gallery tab.
3. Search or browse for a 3D model that you want to download.
Select the model.
4. Press Download Model, and then press the Download link beside Collada (.zip).
N O T E S
o
When you first download a 3D model, Google 3D Warehouse could prompt you for a
nickname.
o
If youāre using MacīOSīX operating system software and you cancel the download, the
3D model still saves to the Downloads folder.
5. Save the .zip file to your computer.
6. Extract the contents of the .zip file to a folder on your computer.
C H A P T E R 7
Using SMARTīNotebook 3DīTools and Mixed Reality Tools
66
Chapter 8: Troubleshooting
Document camera issues 69
SD Card view issues 70
This chapter includes troubleshooting information for your SMARTīDocumentīCamera.
Document camera issues
Use the following table to troubleshoot issues with your document camera.
Issue Solution
No image displays.
l
Turn off your document camera (see page 22). Securely
connect all cables and connect the cameraās AC adapter to a
power outlet. Turn on your document camera.
l
Adjust the zoom dial. The camera may be on a blank section of
your document.
l
Ensure the output switches on the side panel are set to the
proper image output:
o
VGA DVI-D or Composite on the side panel
o
NTSC or PAL on the bottom of your document camera
No image displays after you
restart your computer when
your document camera is
connected through a USB
hub.
1.
Turn off your document camera, and then wait several
seconds.
2.
Turn on your document camera again.
The image is out of focus.
l
Press the Auto Focus button.
l
Use the manual focus.
l
Move the camera further away from the object.
The image is scrambled or
black and white when a
television is the display
device.
Ensure the NTSC/PAL switch on the bottom of the document camera
is set correctly. See Switching between NTSC and PAL on page 15.
Chapter 8
69
Issue Solution
The image is too dark.
l
Press the brightness buttons on your document camera.
l
If the object isnāt well lit, turn on your document camera LED.
l
Adjust the shutter speed. See Camera view Image Settings
on-screen display menu on page 32.
The image is broken apart
by lines.
l
Adjust the distance between the object and the camera.
l
Adjust your projector settings.
SMARTīNotebook software
enters Mixed Reality mode
accidentally.
1.
Press SMART Document Camera in the toolbar.
2.
Press Additional Settings , and then clear the selection of
Automatically Start Mixed Reality Tools.
N O T E
To enable the automatic detection of Mixed Reality again, press
Additional Settings , and then select Automatically Start
Mixed Reality Tools.
SD Card view issues
Use the following table to troubleshoot issues with SD Card view.
Issue Solution
No image appears when you
press the SD Card view
button.
l
Check the connection between your document camera and the
projector, television or display. See Setup configurations for
Camera view and SDīCard view on page 11.
l
Ensure your document camera, projector or television is turned
on.
A crossed out, red SDīCard
icon appears when you
press the SD Card view
button.
Place a SD or SDHC memory card in your document camera SD
card slot.
OR
There are no images on the memory card.
The SD Card view menu
does not include
SDīSettings .
In Camera view, set USB-B mode to Application. See Setting USB-B
Application mode on page 39.
Slideshow doesnāt start, and
there are images in the
memory card.
Your slideshow is set to Lock, and you donāt have any locked
images.
Set the slideshow to All. See Slideshow Settings on-screen display
menu on page 49.
OR
Lock some or all of the images in the memory card. SeeīLocking and
unlocking images on page 46.
C H A P T E R 8
Troubleshooting
70
Appendix A: Hardware environmental
compliance
SMARTīTechnologies supports global efforts to ensure that electronic equipment is manufactured,
sold and disposed of in a safe and environmentally friendly manner.
Waste Electrical and Electronic Equipment
regulations (WEEE directive)
Waste Electrical and Electronic Equipment regulations apply to all electrical and electronic equipment
sold within the European Union.
When you dispose of any electrical or electronic equipment, including SMARTīTechnologies
products, we strongly encourage you to properly recycle the electronic product when it has reached
the end of its life. If you require further information, please contact your reseller or
SMARTīTechnologies for information on which recycling agency to contact.
Restriction of Certain Hazardous Substances
(RoHS directive)
This product meets the requirements of the European Unionās Restriction of Certain Hazardous
Substances (RoHS) directive 2002/95/EC.
Consequently, this product also complies with other regulations that have arisen in various
geographical areas, and that reference the European Unionās RoHS directive.
Packaging
Many countries have regulations restricting the use of certain heavy metals in product packaging. The
packaging used by SMARTīTechnologies to ship products complies with applicable packaging laws.
Appendix A
71
Chinaās Electronic Information Products
regulations
China regulates products that are classified as EIP (Electronic Information Products).
SMARTīTechnologies products fall under this classification and meet the requirements for Chinaās
EIP regulations.
A P P E N D I X A
Hardware environmental compliance
72
3
3D models
disguising 64
inserting 56
manipulating 57
manipulating with Mixed Reality Tools 62
revealing 65
rotating 57
textures 56
3D Object files 56
3D scenes 60
map 62
A
activation 16
animation 58
pausing 58
playing 58
restarting 58
anti-glare sheet 6
arm 3
B
button
navigation control 61
C
Camera view 11, 29
cautions i
Chinese regulations 72
COLLADA files 56, 65-66
Computer view 27
connections 4, 9
control panel 4
D
DAE files 56, 65-66
disguises 64
document camera
about 2
parts of 3
positioning 21
turning on and off 22
using with SMART Notebook software 24
downloads 15
DVI cables 14
E
EIP regulations 72
European Union regulations 71
F
FBX files 56
features 2
flat-panel displays 13
G
Gallery 57
Google 3D Warehouse 65-66
downloading 66
Google SketchUp 65
Index
73
H
HD displays 14
head 3
I
Image Mate software 7, 15
important information i
K
keyboard controls 61
L
labels 59
adding 59
removing 59
LED light 22
M
magic hats 64
changing color 65
menu (Camera view on-screen display) 31
Microscope mode 31
mixed reality mat 53
Mixed Reality Tools 5, 16
N
navigation controls 61
Notebook
software
SeeīSMART Notebook
software
NTSC encoding system 5, 15
O
OBJ files 56
on-screen display menu 31
output resolutions 15
P
packaging 71
PAL encoding system 5, 15
power 5, 22
printed documents, displaying 22
projectors 13-14
R
rear connection panel 4
resolutions 15
RoHS directive 71
S
scenes 60
SD and SDHC memory cards 23, 40
SD Card view 11, 43, 70
setup 11
side connection panel 5
SketchUp sketching software 65
SMART Notebook software 6, 15, 24
T
televisions 14
troubleshooting 69
U
USB cables 5
V
VGA cables 6, 13
views
about 3
Camera 11, 29
I N D E X
74
