Yale Assure Manual.pdf

P/N YRD256-MNL-0003 Rev E

FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT, VOIDING THE FACTORY WARRANTY AND COULD LEAD TO FAILURE OF THE PRODUCT TO PROVIDE ACCESS.

Yale Assure Lock

® ®

Key Free Touchscreen Deadbolt

Installation and Programming Instructions

(YRD256)

This manual will walk you through all the required steps to add your new

Yale Assure Lock SL to your door.

• Remove Existing Door Hardware

• Double Check Door Measurements

• Install your Assure Lock SL

• Program your Assure Lock SL

• Add your Assure Lock SL to your smart home system or August App*

Before you begin

for step-by-step installation

instructions & to register

your product

DOWNLOAD

THE BILT APP

Tools Needed

Standard

Phillips Head

Screwdriver

Utility Knife

Drill

Wood Mortise

Chisel

Pencil

Tape

Measure

Level

Tools necessary only for new doors

or adjusting existing door

*If purchased with Yale Smart Module or Connected by August Kit

P/N YRD256-MNL-0003 Rev E

What's In The Box

Loosen screw to

remove cover

Key Free Touchscreen

Keypad

4 AA Batteries

Inside Lock Assembly

(Separates into 3 components)

Battery Cover

Inside Lock Mounting Plate

Installation Guide Envelope

(Includes this manual and

door checker with template)

Mounting Hardware

The mounting hardware box includes 16 components

Strike Plate

Adjustable

Deadbolt

OR OR

Screw Set D

Silver

for

2 to 2-1/4"

Door Thickness

Screw Set C

Black

Standard for

1-3/4"

Door Thickness

Strike Plate

and

Deadbolt Screws

Inside Lock

Screws

Optional

Security

Strike Plate

Screws

Let's Get Started

Screw Set B

Green

for

1-3/8"

Door Thickness

Optional Yale

Smart Module

P/N YRD256-MNL-0003 Rev E

Removing Existing Door Hardware

Do not discard old lock hardware until Assure Lock SL has been successfully installed.

Frame

P/N YRD256-MNL-0003 Rev E

New Door Marking Template

Door Checker

Check Door Measurements and

Make Adjustments If Needed

Use door checker from installation guide envelope to verify your door

measurements and make any needed adjustments.

With door checker, use template from installation guide envelope to prep a new door

that has not been predrilled for hardware.

P/N YRD256-MNL-0003 Rev E

Actual Size

*Deadbolt latch position is based

on backset. Choose position

appropriate for your door.

Reference Door Checker

measurements E and F.

default

*2-3/8" Backset

*2-3/4" Backset

Installing Latch & Strike Plate

Press

Pull

Bolt must be in retracted

(unlocked) position. Note horizontal

orientation of tailpiece slot and UP

orientation of deadbolt latch.

Backset

Actual Size

Choose

standard

strike plate

screws or

security

screws.

Actual Size

optional

Bolt must be

in retracted

(unlocked)

position.

P/N YRD256-MNL-0003 Rev E

Installing Touchscreen Keypad

Outside of Door

Inside of Door

Bolt must be in retracted

(unlocked) position. Note

horizontal orientation of

tailpiece slot.

P/N YRD256-MNL-0003 Rev E

Installing Inside Mounting Plate

Actual Size

Inside of Door

Make sure keypad

and mounting plate

are straight before

tightening screws.

Screw Set D

Silver

for

2 to 2-1/4"

Door Thickness

Screw Set C

Black

Standard for

1-3/4"

Door Thickness

Actual Size

Insert cable

through cable hole.

Choose through bolt appropriate for

your door thickness. Verify appropriate

through bolt with the door checker.

Screw Set B

Green

for

1-3/8"

Door Thickness

Attaching the Cable Assembly

Inside of Door

Use cable hooks to

ensure proper routing.

Do not pinch wire.

Ensure cable is

securely fastened

into adapter.

P/N YRD256-MNL-0003 Rev E

Installing Inside Lock

Actual Size

Inside of Door

Ensure thumbturn

is vertical. If the thumbturn

does not move freely, refer

to the hardware

troubleshooting steps.

Horizontal

P/N YRD256-MNL-0003 Rev E

Testing Mechanical Operation

Inside of Door

If thumbturn operation fails, check the installation beginning with Step 3.

P/N YRD256-MNL-0003 Rev E

Installing Optional Yale Smart Module

Batteries must not be

installed prior to inserting

and/or removing the Yale

Smart module.

Inside of Door

For more information about Yale Smart modules and smart home features visit:

https://www.yalehome.com/en/yale/yalehome/residential/yale-smart-home-guide/

P/N YRD256-MNL-0003 Rev E

® ®

Congratulations, you've installed the Yale Assure Lock SL

Key Free Touchscreen Deadbolt ( )!YRD256

Installing Batteries and Cover

Inside of Door

Tighten screw

to replace cover

"Welcome to

Yale Real Living"

Bolt must be in retracted

(unlocked) position before

installing batteries.

Additional entry codes and further

programming can be done through

the Settings Menu. Refer to page 15.

Press the Yale logo to wake the lock.

You will be guided to set up your

lock by following the audio

instructions on the lock.

Using Your Lock

Speaker

Press to return to

previous Settings Menu

Low Battery

Indicator

All Code Lockout Mode

Indicator

Battery Back-up

Hold a 9V battery to the

terminals in case of dead

lock batteries

Touchscreen Keypad

Press to wake keypad

or lock door

Enter Master Entry Code

and press to access

Settings Menu

Press to enter

or unlock

Inside Lock

Thumbturn for

manual locking

and unlocking

Privacy Button

Battery Cover

Inside Notiﬁcation

Light

P/N YRD256-MNL-0003 Rev E

Creating Master Entry Code

Enter 4-8

digit Master

Entry Code

The master entry code is used to change the lock settings.

A security best practice is to set your master code with 6 or more digits and create a separate code

that is used daily to lock and unlock the door.

Press

key to continue."

"Register Master

Code. Press the gear

Press

"Registered"

the gear key."

"Enter a 4 to 8 digit

PIN code followed by

P/N YRD256-MNL-0003 Rev E

Creating Entry Codes

Enter Master

Entry Code

Press

Master Entry Code must be created ﬁrst.

*Max user codes = 250 with Smart Module; 25 without.

Press

Adding more *User Codes:

Enter 4-8 digit entry code

Press

To end programming:

Enter 4-8 digit entry code

Press

(code ﬂashes)

Press

"Menu mode, press the

gear key to continue."

Press

P/N YRD256-MNL-0003 Rev E

Deleting Entry Codes

Enter Master

Entry Code

Press

Deleting one entry code:

Enter 4-8 digit entry code

Press

To delete all entry codes

(Does not delete Master Entry Code):

press the gear key

to continue."

enter number,

"Menu Mode,

Press

Enter

To delete one entry code,

you must enter the entry

code you wish to delete.

P/N YRD256-MNL-0003 Rev E

Unlocking Door with Entry Codes

Enter Entry Code

Press

P/N YRD256-MNL-0003 Rev E

Setting Deﬁnitions

*The Master Entry Code must be created prior to any other programming of the lock.

Creation required*

Wrong Code Entry Limit

5 Times

One Touch Locking

Enabled

Inside Indicator Light

Disabled (Off)

Settings Default Setting

Master Entry Code

Auto Re-lock

Disabled

Volume

Enabled (Low)

Shutdown Time 60 Seconds

Privacy Button

Disabled

All Code Lockout Mode

Disabled

Language English

Deﬁnition

The Master Entry Code is used for programming and for feature

settings. It must be created prior to programming the lock. The

Master code will also operate (unlock/lock) the lock.

After a successful code entry or manual unlock with the key, the

lock will automatically re-lock after each unlock in an effort to keep

your home secure. This feature is optional, and can be turned off.

In the ON mode, the lock will automatically re-lock after thirty (30)

seconds.

Located on the inside lock. Shows active status (Locked) of lock

and can be enabled or disabled in the Advanced Lock Settings

(Main Menu selection #3).

When the latch is retracted, activating the keypad will extend the

latch (during Auto Re-lock duration or when Auto Re-lock is

disabled). When One-Touch Re-lock is not in use (disabled), any

valid PIN code will re-lock the lock.

Privacy mode is disabled by default. Enable Privacy mode by

pressing the privacy button for 4 seconds to put the lock in do-

not-disturb mode (all pin codes are disabled).

The volume setting for entry code veriﬁcation is set to Low (2) by

default; otherwise it can be set to High (1) or Silent (3) for quiet

areas.

Choosing English (1), Spanish (2) or French (3) becomes the

(default) setting for the lock's voice prompts.

This feature is enabled by the Master Entry Code. When enabled, it

restricts all user (except Master) Entry Code access. When

attempting to enter a code while the lock is in All Code Lockout

mode, the RED locked padlock will appear on the screen.

After ﬁve (5) unsuccessful attempts at entering a valid entry code,

the lock will shut down and not allow operation for sixty (60)

seconds.

The Lock will shutdown (ﬂashing RED) for sixty (60) seconds and

not allow operation after the wrong code entry limit (5 attempts)

has been met.

P/N YRD256-MNL-0003 Rev E

Customizing Lock Through Settings Menu

*Master Entry Code Required

Join the Network

Enable

Disable

English

Spanish

French

Silent

Low

High

Exit the Network

Volume Setting

Language Setting Mode

All Code Lockout Mode

**Network Module Setting

Default settings in bold.

Privacy Button Setting

Enable

Disable

Handing the Lock

Preforms automatic

handing of the lock

Advanced Lock Settings

Auto Re-lock

Disable

30 sec

Inside Indicator Light

One Touch Locking

Enable

Disable

Enable

60 sec

3 min

2 min

Disable

1. Press Yale logo to wake up lock .

2. Enter Master Entry Code* followed by icon.

Lock Response: "Welcome to the Settings Menu. Press each number to hear available settings

and then press the settings icon to enter."

3. Enter digit corresponding to the function to be performed followed by the icon.

Follow the voice commands.

*The Master Entry Code must be created prior to any other programming of the lock.

**Network Module Setting function appears only with Yale Smart module installed.

Here is an example of how to set Auto Lock to 30 seconds:

Master Entry Code , 3 , 1 , 2 ,

Exit Settings Menu

Remain in Settings Menu

P/N YRD256-MNL-0003 Rev E

Troubleshooting

Symptom

Suggested Action

Lock does not respond –

door is open and accessible.

•

Lock chimes to indicate code

acceptance, but door will not open.

•

Lock operates to allow access, but

will not automatically re-lock.

•

Entry codes will not register.

•

Upon entering an entry code and

pressing key, the lock displays

"invalid code" error or lock times out

without responding.

•

Lock operates, but makes no sound.

•

* When batteries are replaced, Smart Module locks have a real time clock that will be set through the User Interface (UI);

it is recommended to verify correct date and time particularly those locks operating under Daylight Saving Time (DST).

Lock does not respond –

door is locked and inaccessible.

Lock is on for a while then shows no

reaction. Lights dim.

•

Apply a 9V battery to terminals below the keypad for backup power option.

Yale keypad becomes active when the Yale logo is pressed.

Verify contact with the logo.

If keypad numbers are visible, check to see if they respond when pressed.

Check batteries are installed and oriented correctly (polarity) in battery case.

Check batteries are in good condition; replace batteries* if batteries are dead.

Check to see if keypad cable is fully connected and is not pinched.

Batteries may not have enough power. Replace batteries*.

•

Batteries do not have enough power. Replace batteries*.

Check the door gaps for any foreign objects between door and frame.

Check that the cable is ﬁrmly connected to the inside lock.

Check to see if Auto Re-lock is enabled.

Disable Auto Re-lock to lock the door (manually).

If low battery indicator is lit, change batteries*.

Entry codes must consist of 4 to 8 digits.

The same entry code cannot be used for multiple users.

Management of entry codes is set by the authority of the Master Code, which is

set ﬁrst. Contact the Master user.

Entry codes must be entered within 5 seconds (while keypad is active) or

process will have to be restarted.

Check or gear cannot be used as part of the entry code.

All Code Lockout Mode is enabled. Only the Master Entry Code can

enable/disable All Code Lockout Mode. Contact the Master user.

•

Check to see if the lock is set to All Code Lockout Mode. Setting/managing All

Code Lockout Mode is done through Master Entry Code only.

Contact Master user.

Check to see if Volume is set to Silent (see Feature #4).

This is the alert to replace the batteries. Replace all four (4) batteries* with new

AA Alkaline batteries.

Upon entering an entry code and

pressing the key, red padlock icon

appears and there are different tones.

Upon entering an entry code and

pressing the key, lock responds

"Wrong number of digits".

•

The digits entered were incorrect or incomplete. Re-enter

the correct code followed by the check key.

•

Verify entered code is a valid, previously programmed, 4 to 8 digit code.

Lock responds "Low Battery"

Lock shows an X on keypad after

entering a code.

•

Bolt failed to fully retract.

Refer to the "Hardware Troubleshooting" steps on page 21.

•

Entry code has not been scheduled for use at time of day it is tried.

Try entry code again during its scheduled time.

Deadbolt does not extend when

locking the door with keypad.

•

Lock was not handed properly. Rehand lock through settings menu.

P/N YRD256-MNL-0003 Rev E

Tab

Hardware Troubleshooting

Helpful Tip:

Ensuring smooth deadbolt operation can enhance your battery life.

1. Remove plate from door frame with a manual

screwdriver. (Using an electric driver may strip screw

heads or enlarge screw holes.)

4. If door cannot be adjusted sufﬁciently with strike

tab, both knob/lever/handleset latch and deadbolt

latch could require adjustment – we suggest you

contact a local locksmith for assistance.

To adjust Knob/Lever/Handleset strike plate:

If deadbolt does not fully extend, consider increasing

depth of deadbolt strike pocket in frame.

2. Locate strike plate tab.

Bend the tab towards surface of

strike. Note: a small change may be

all that is required

3. Reinstall strike plate using a manual screw driver

and test again.

If you feel resistance, ensure deadbolt strike plate

aligns with deadbolt. If deadbolt strike plate is out of

alignment, please attempt to adjust

knob/lever/handleset strike using steps below. The

knob/lever/handleset latch engagement into the strike is

the main component used for door alignment.

For help with misalignments, watch our door

alignment video:

https://www.yalehome.com/en/yale/yalehome/support/

yrl-electronic-lock-faqs/electronic-lock-installation/

Thumbturn

Door Open

Keypad

Door Open

Thumbturn

Door Closed

Test with door

closed using

thumbturn.

If deadbolt does not extend or retract easily when testing thumbturn and keypad operation,

revisit inside and keypad installation steps. It is important that the bolt be in the retracted

position during lock installations and that installation procedure is followed carefully.

P/N YRD256-MNL-0003 Rev E

Product Support Tel 1-855-213-5841 • www.yalehome.com

FCC:

Class B Equipment

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful Interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Ÿ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Cet appareillage numérique de la classe A répond à toutes les exigences de l'interférence canadienne causant des règlements d'équipement.

Industry Canada:

Ÿ Reorient or relocate the receiving antenna.

Ÿ Increase the separation between the equipment and receiver.

This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.

Warning: Changes or modiﬁcations to this device, not expressly approved by ASSA ABLOY Residential Group could void the user's authority to operate the equipment.

Ÿ Consult the dealer or an experienced radio/TV technician for help.

Yale®, Yale Real Living® and Assure Lock® are registered trademarks of ASSA ABLOY Residential Group. Other

products' brand names may be trademarks or registered trademarks of their respective owners and are mentioned for

express written permission of ASSA ABLOY Residential Group is prohibited.

NOTE TO INSTALLER AND CONSUMER

While Yale has included several features to prevent lockout

(9-Volt battery jumper, low battery warnings), it is still possible

for a lockout situation to occur. Because this product does not

have a mechanical override (a key), Yale recommends to use

this product in an environment where there are additional

entry points into the dwelling.

Resetting Lock to Factory Default

Reset

Button

Interior Lock

3. The reset button (see image at right) is located beside

the cable adapter.

When lock is reset to factory defaults all user codes

(including the Master Entry code*) are deleted and all

programming features are reset to original default settings

(see below).

2. Remove the interior side of the lock to access the

reset button.

1. Remove the battery cover and batteries.

4. While pressing the reset button (minimum of 3 seconds)

reinstall batteries. Release reset button.

5. Replace battery cover.

Upon reset, Master Entry Code creation is the only option

available and must be performed prior to any other

programming of the lock.

® ®

Yale Z-Wave Plus Smart Module

Installation Guide

Adding a Yale Z-Wave Plus Smart Module to your Assure Lock & Z-Wave System

1. On your lock keypad, enter your master entry code followed by the icon

2. Press the 7 key followed by the icon

3. Press the 3 key followed by the icon

4. Open the Z-Wave system's smart home or alarm app and follow the instructions for

removing a device

5. Remove the Yale Smart Module from the slot above the battery compartment

IMPORTANT: The batteries must be removed before removing the Yale Smart Module:

• Remove battery cover

• Remove batteries

• Insert or remove Yale Smart Module

• Reinstall batteries

• Reinstall battery cover

6. If you're adding a new Yale Smart Module, follow the instructions included with it

P/N AYR202-ZW-INSTAL-FUL Rev E

Removing a Yale Z-Wave Plus Smart Module from your Assure Lock & Z-Wave System

1. Install the Yale Smart Module into the slot above the battery compartment

IMPORTANT: The batteries must be removed before removing the Yale Smart Module:

• Remove battery cover

• Remove batteries

• Insert or remove Yale Smart Module

• Reinstall batteries

• Reinstall battery cover

2. Open the Z-Wave system's smart home or alarm app on your smartphone or tablet

3. Follow the in-app instructions for adding a new device

4. On your lock keypad, enter your master entry code followed by the icon

5. Press the 7 key followed by the icon

6. Press the 1 key followed by the icon

Please use this procedure only when network primary controller is missing

or otherwise inoperable.

Warning: Changes or modiﬁcations to this device, not expressly approved by ASSA ABLOY

Residential Group could void the user's authority to operate the equipment.

FCC:

This radio transmitter 6982A-YRHCPZW0FM has been

approved by Industry Canada to operate with the antenna

types listed below with the maximum permissible gain

indicated. Antenna types not included in this list, having a

gain greater than the maximum gain indicated for that type,

are strictly prohibited for use with this device.

Model: YRMZW2-US

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,

AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE

RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE

UNDESIRED OPERATION.

Model: YRMZW2-US

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

Interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

Ÿ Reorient or relocate the receiving antenna.

Contain FCC ID: U4A-YRHCPZW0FM

Ÿ Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Contain IC: 6982A-YRHCPZW0FM

Section 7.1.2 of RSS-GEN Under Industry Canada

regulations, this radio transmitter may only operate using an

antenna of a type and maximum (or lesser) gain approved for

the transmitter by Industry Canada. To reduce potential radio

interference to other users, the antenna type and its gain

should be so chosen that the equivalent isotropically radiated

power (e.i.r.p.) is not more than that necessary for

successful communication.

Ÿ Increase the separation between the equipment and

receiver.

Section 7.1.3 of RSS-GEN This Device complies with

Industry Canada License-exempt RSS standard(s). Operation

is subject to the following two conditions: 1) this device may

not cause interference, and 2) this device must accept any

interference, including interference that may cause

undesired operation of the device.

Industry Canada:

Ÿ Consult the dealer or an experienced radio/TV technician

for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO

CONDITIONS.

En vertu des règlements d'Industrie Canada, cet émetteur

radio ne peut fonctionner avec une antenne d'un type et un

maximum (ou moins) approuvés pour gagner de l'émetteur

par Industrie Canada. Pour réduire le risque d'interférence

aux autres utilisateurs, le type d'antenne et son gain doivent

être choisies de façon que la puissance isotrope rayonnée

équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour

une communication réussie.

Cet appareil est conforme avec Industrie Canada RSS

standard exemptes de licence(s). Son fonctionnement est

soumis aux deux conditions suivantes: 1) ce dispositif ne

peut causer des interférences, et 2) cet appareil doit

accepter toute interférence, y compris les interférences qui

peuvent causer un mauvais fonctionnement du dispositif.

Le présent émetteur radio 6982A-YRHCPZW0FM a été

approuvé par Industrie Canada pour fonctionner avec les

types d'antenne énumérés ci-dessous et ayant un gain

admissible maximal. Les types d'antenne non inclus dans

cette liste, et dont le gain est supérieur au gain maximal

indiqué, sont strictement interdits pour l'exploitation de

l'émetteur.

CAN ICES-3B/NMB-3B

24/7 Tech Support : 1-855-492-0505 • www.yalehome.com

Yale® is a registered trademark of ASSA ABLOY Residential Group. Other products' brand names may

be trademarks or registered trademarks of their respective owners and are mentioned for reference

express written permission of ASSA ABLOY Residential Group is prohibited.

This device is a security enabled Z-Wave Plus product that is able to use encrypted Z-Wave Plus messages to

communicate to other security enabled Z-Wave Plus products. This device must be used in conjunction with a Security

Enabled Z-Wave Controller in order to fully utilize all implemented functions. This product can be operated in any Z-

Wave network with other Z-Wave certiﬁed devices from other manufacturers. All non-battery operated nodes within the

network will act as repeaters regardless of vendor to increase reliability of the network.

Yale ZigBee Module

®®

Installation and Programming Instructions

Installing the ZigBee Module

This device is a security enabled ZigBee product that is able to use encrypted ZigBee

messages to communicate to other security enabled ZigBee products. This device must be

used in conjunction with a Security Enabled ZigBee Controller in order to fully utilize all

implemented functions. This product can be operated in any ZigBee network with other

ZigBee certiﬁed devices from other manufacturers. All non-battery operated nodes within the

network will act as repeaters regardless of vendor to increase reliability of the network.

To Enroll the Module (Inclusion Mode):

• Enter the 4-8 digit Master code followed by the key.PIN

• Press the key followed by the key.

To Unenroll the Module (Exclusion Mode):

• Enter the 4-8 digit Master code followed by the key.PIN

• Press the key followed by the key.

Enrolling/Unenrolling the Network Module:

IMPORTANT: the batteries be removed priormust

to removing and/or inserting the network module:

• Remove battery cover.

• Remove batteries.

• Remove and/or insert network module.

• Reinstall batteries.

• Replace cover.

P/N 202- - - Rev CAYR ZB INSTAL FUL

FCC:

FCC ID YRHCPZB FM: U4A- 0

Model: 2YRMZB

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the Rules. These limits are designed to provideFCC

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

Interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and

receiver.

 Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

 CTVonsult the dealer or an experienced radio/

technician for help.

This equipment complies with radiation exposureFCC

limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum

distance 20cm between the radiator and your body. This

transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

This device complies with Part 15 of the rules.FCC

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation. Any

changes or modiﬁcations not expressly approved by

manufacturer could void the user’s authority to operate the

equipment.

IMPORTANT! Any changes or modiﬁcations not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

Industry Canada:

IC YRHCPZB FM: 6982A- 0

Model: 2YRMZB

This Device complies with Industry Canada License-exempt

RSS standard(s). Operation is subject to the following two

conditions: 1) this device may not cause interference, and

2) this device must accept an

y interference, including

interference that may cause undesired operation of the

device.

Le présent appareil est conforme aux d'IndustrieCNR

Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes:

(1) l'a

ppareil ne doit pas produire de brouillage, et (2)

l'utilisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, meme si le brouillage est susceptible

d'en compromettre le fonctionnement.

Important Note:

Radiation Exposure Statement:

This equipment complies with radiation exposure limitsIC

set forth for an uncontrolled environment. This equipment

should be installed and operated with minimum distance

20cm between the radiator and your body.

Note Importante: (Pour l’utilisation de dispositifs

mobiles)

Declaration d’exposition aus radiations:

Cet équipement est conforme aux limites d´exposition aux

rayonnements établies pour un environnement nonIC

contrôlé. Cet équipment doit être installé et utilisé avec un

mimimum de 20 cm de distance entre la source de

rayonnement et votre corps.

IMPORTANT! Any changes or modiﬁcations not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

IMPORTANT! Tous les changements ou modiﬁcations pas

expressément approuvés par la partie responsable de la

conformité ont pu vider l’autorité de l’utilisateur pour

actioner cet équipment.

CAN ICES NMB-3B/ -3B

Product Support T

el. 800 YALE (9253) - UAE/+971 800 9253 - International • www.yale.ae

Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.

Yale® and Yale Real Living® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group Company.

Other products’ brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only.

YALE, with its unique global reach and range of products, is the world's favorite lock

– the preferred solution for securing your home, family and personal belongings.

ASSA ABLOY is the global leader in door opening solutions,

dedicated to satisfying end-user needs for security, safety and convenience.

Yale iM1 Network Module

Installation and Programming Instructions

Installing the Yale iM1 Network Module

IMPORTANT: the batteries must be removed prior

to removing and/or inserting the network module:

• Remove battery cover and batteries.

• Remove and/or insert Network Module.

• Reinstall batteries and battery cover.

Enrolling the iM1 Network Module:

The Yale iM1 Network Module must be used with a Yale Assure Lock or Yale nexTouch

Lock and cannot be used in conjunction with any other Yale Network Module.

To Enroll the Module:

•Enter the 4-8 digit Master PIN code followed by the key.

•Press the key followed by the key.

P/N AYR202-iM1-INSTAL-FUL Rev E

1. After following steps listed on other side of page for enrolling module, download the Yale Secure

app from App Store®.

2. Ensure Bluetooth® is enabled on your iPhone®, iPad® or iPod touch®, and that you're within a

foot of your Yale lock.

3. Open the Yale Secure app and agree to allow app to access your Home Data.

4. If you do not have a home already created, create a new home when prompted. Tap + to add a

new Yale Lock.

5. The App will search for your Yale Lock. Be sure that you are within close proximity (less than

two feet or so). When "Yale Lock" appears, tap to add.

If lock does not appear, enter your Master Pin Code on lock keypad, tap gear, tap 7, tap gear,

tap 1 and then tap gear.

6. Scan your Accessory Setup Code; shown below, or manually enter within the app.

Connecting the Yale Secure App with the Yale iM1 Network Module

Accessory Setup Code

Product Support Tel 800YALE (9253) - UAE / +971 800 9253 - Int'l • www.yale.ae

Yale®, Yale Real Living® and Assure Lock® are registered trademarks of ASSA ABLOY Residential Group. nexTouch™ is a trademark of ASSA ABLOY Residential Group. Other products’ brand names may be trademarks or registered

Reproduction in whole or in part without the express written permission of ASSA ABLOY Residential Group is prohibited.

Apple®, iPhone®, iPad®, iPod touch® and Siri® are trademarks of Apple Inc., registered in the U.S. and other countries. HomeKit is a trademark of Apple Inc. Use of the Works with Apple HomeKit logo means that an electronic accessory

has been designed to connect specifically to iPod touch, iPhone or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance

with safety and regulatory standards. Use of the HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple

performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.

Class B Equipment

FCC:

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT

TO THE FOLLOWING TWO CONDITIONS. (1) THIS DEVICE MAY NOT CAUSE HARMFUL

INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Ÿ Increase the separation between the equipment and receiver.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful Interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

Ÿ Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

Cet appareil est conforme avec Industrie Canada RSS standard exemptes de

licence(s). Son fonctionnement est soumis aux deux conditions suivantes: 1) ce

dispositif ne peut causer des interférences, et 2) cet appareil doit accepter toute

interférence, y compris les interférences qui peuvent causer un mauvais

fonctionnement du dispositif.

Ÿ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Industry Canada:

En vertu des règlements d'Industrie Canada, cet émetteur radio ne peut fonctionner

avec une antenne d'un type et un maximum (ou moins) approuvés pour gagner de

l'émetteur par Industrie Canada. Pour réduire le risque d'interférence aux autres

utilisateurs, le type d'antenne et son gain doivent être choisies de façon que la

puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est

nécessaire pour une communication réussie.

Section 7.1.2 of RSS-GEN Under Industry Canada regulations, this radio transmitter

may only operate using an antenna of a type and maximum (or lesser) gain

approved for the transmitter by Industry Canada. To reduce potential radio

interference to other users, the antenna type and its gain should be so chosen that

the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary

for successful communication.

CAN ICES-3B/NMB-3B

Ÿ Reorient or relocate the receiving antenna.

Section 7.1.3 of RSS-GEN This Device complies with Industry Canada License-

exempt RSS standard(s). Operation is subject to the following two conditions: 1) this

device may not cause interference, and 2) this device must accept any interference,

including interference that may cause undesired operation of the device.

Warning: Changes or modiﬁcations to this device, not expressly approved by ASSA ABLOY Residential Group

could void the user's authority to operate the equipment.